-
• #63902
I want to do the transcontinental race next year, can anyone tell me the dates I would need off work? Can't find them online and tomorrow is cut off for holiday requests at work.
-
• #63903
You can also get the 11 speed free hub body for the Novatec D712 hubs, and convert it yourself.
Did you do this? I'm wondering what's involved.
I've just been informed that due to a listing error, the 11-speed D712 hubs I've ordered are in fact 10-speed only. So my best bet is probably to return them and convert the D042SB hubs I already own, if possible.
-
• #63904
Is TF2 suitable for greasing a chain?
-
• #63905
Accidental 'cross ended up with a very bent hanger this morning... where can I get a replacement ASAP?
-
• #63906
Gonna be bed bound for the next few days after a pretty serious crash on the bike Thursday night, looking for some bike videos or short clips, vimeo etc to watch.
Red hook crit,Rapha etc
Any suggestions?
-
• #63907
Where's the best place to buy large plastic boxes for the purpose of moving house, also where's best to get large cardboard boxes from?
-
• #63908
Might be worth considering renting removal crates if you only need them for moving. A quick Google search turned these up (South East) - if I read it correctly it's about £1 per week per box:
http://www.se-cratehire.co.uk/LC3-Crates.html -
• #63909
Is TF2 suitable for greasing a chain?
It's an effective lubricant, but it's also en even more effective grime retainer, so it turns into grinding past in practice. Also, if you're into marginal gains, grease is very slow.
-
• #63910
Does he mean one of the tf2 chain lubes or the spray and greasing the chain should read lubing the chain?
-
• #63911
Something may have been lost in translation. What he needs for his chain in fork handles.
-
• #63913
Best place to buy Challenge Strada Bianca 700x30c with gumwalls?
-
• #63914
Is it not steel?
-
• #63915
yes, i think its too far too bend back
-
• #63916
Is it a replaceable hanger?
If not, just bend it back, steel is good like this.
-
• #63917
yeah its replaceable! just need to figure out which of 200
-
• #63918
Take the derailleur off and have a close inspection, it should have a serial number on it.
Or ask Matt.
-
• #63919
I was thinking of using this.
So yes, lube not grease.
1 Attachment
-
• #63920
That'll be OK for a clean up and will lube it to an extent but will not last long, if you give it a quick spray after every couple of rides you'll probably be fine but you'll be better off getting some kind of proper chain lube and applying a bit after cleaning the chain then wiping off any excess.
-
• #63921
Am I correct in thinking that the rifling in my fork steerer means its Columbus SLX/SPX? Does this mean the frame's probably SLX/SPX as well, or am I gonna have to take the BB out and stick a finger in the downtube to check?
-
• #63922
What will you do differently once you have established which tubeset was used to make it?
-
• #63923
Flaunt.
-
• #63924
Get decals
-
• #63925
Q
does anyone know a reasonably priced gun metal coloured 27.2 350mm+ seatpost?
i've seen Syncros. (Easton/ DA too pricey.)
ta