Part clearance - Fuji Drops, mtb beater bars, Dura Ace/ Mavic Tub, Claris Flat bar levers + More.

@thrasher ta for updating, I'll pm op.

Rim measurements are 19mm externally and approx 15.5mm internally, just measured again to check and confirm.
OLN - hub is spaced to fit 126mm or 130mm frames without problem and I have tested in both.
The OLN is actually oddly 116 mm, but then has 5 mm anti twist spacers meaning the width you use is either 126mm or 130mm depending on which side of the dropouts you then decide to use the additional 2mm spacers on.

Sheldon Brown says all rims between and including 23 - 32 would be compatible: http://www.sheldonbrown.com/tire-sizing.html

Price drops/ open to offers.

Sorry the wheel wasn't for you, plenty still available!

@Brazelephantman
Cheers and sorry if I wasted your time with loads of questions.

GLWS

£25 for the sturmey+tyre combo.

My tyre is 33.5 - so not really suitable for a 19mm rim. Bulb effect and that.

I've tried it before on a 19mm rim and it's not really worked

It's twice that I'm afraid, but nice try. I could knock a few quid off.

No worries at all!

I can give you a 28c tyre that fits perfectly with it ;)

Price drops!
Offers welcome.

That wheel looks like fun. I'll take it if it's still available.

Pm's sent

Sturmey sold,
Thanks for the interest.

.

More added, all listed still available.

Still got tub, tyre and bars.

Do not want to have them anymore, so pm with offers. Take this tub!

Mj Cycles MTB bars - 25.4 - fun and not too wide - £6

Still got this? Meetup central possible?

Yes i do Sir, but you're going to have to come closer to me for these beasts I'm afraid.