-
Been running the same wheel since I got the bike built, truing it once in a while and never replacing a spoke, still fine. It's a beater wheel, cheap steel spokes, Sachs hub, rigida rim. Survived plenty of epic shots which I used to tag with a marker pen on my previous estate-agent-wheel cover and includes my own mallet strikes. Wheel cover was pulled apart by a pedal but wheel still spinning.
estate agent signs don't make a strong wheel or a wheel for that matter
-
Done that too, still fine.
Hitting it with your mallet is different to crashing the wheel
-
Shut it already, 40 quid is cheap enough for any wheel (I bet your crappy wheel cost about the same new). LHBPA has lots of these rims, I was trying to help them out by putting some economic perspective into this and persuade people to go this route.
You are officially the lousiest troll Beagle. -
tenner, and it's an old crappy wheel but it works. Putting facts where it hurts is not trolling...
Shut it already, 40 quid is cheap enough for any wheel (I bet your crappy wheel cost about the same new). LHBPA has lots of these rims, I was trying to help them out by putting some economic perspective into this and persuade people to go this route.
You are officially the lousiest troll Beagle. -
Been running the same wheel since I got the bike built, truing it once in a while and never replacing a spoke, still fine. It's a beater wheel, cheap steel spokes, Sachs hub, rigida rim. Survived plenty of epic shots which I used to tag with a marker pen on my previous estate-agent-wheel cover and includes my own mallet strikes. Wheel cover was pulled apart by a pedal but wheel still spinning.
I could tell you a good story about that wheel. In fact, you paid a lot less than it's real value.
-
I sold him that wheel...
No way!?
Yep, now what's the story?
-
CRC's got £5 front hubs in 48h:
http://www.chainreactioncycles.com/Models.aspx?ModelID=54629http://www.chainreactioncycles.com/Models.aspx?ModelID=54656
48 of those http://www.spacycles.co.uk/products.php?plid=m2b0s156p1269
Sputnik rims
= £40 + your wheelbuilder friend's time
not bad at all!- spare hour for filing the dropouts
I built up a wheel pretty much like this, it's awesome. Recommend these rims.
Beagle = megatroll.
Commitment not equipment...
14 Bike's frame has been tried and tested, full of awesomeness ;)
I am considering one :)
-
Reprimanded :)
Cedric thanks for the info, Beagle stop filling my distribution thread with pointless comments, take your wheel discussion elsewhere.
-
the law has been laid down
-
And it is now gone...
It is a seriously shit wheel...
Sandy_l
coventry_eagle
Ced
deleted
nny
Wicksie
turnpedal
snottyotter
wooodrow-
Post a reply
About
LHBPA Distribution
Posted by
@H-Bomb
Commitment not equipment... Btw, estate agent signs are free, just saying...