Can you help to identify these frames, bikes or parts?

at a glance i'd say late 80s-90s, but someone who has more knowledge of eddy merckx will be able to clarify.

BB will be either english or italian threaded: measure the shell and 68mm is english, whereas 70mm will be italian. you will also need to know the spindle length, so take off the cranks and measure the axle. the cranks look to be shimano, so you use a jis taper BB. shimano UN-54 seems to be the standard..

a back brake wouldnt hurt either

age and BB size ?

Hi

Just got a beauty named Eddy !

can anyone help with the age and BB specs.

I wish upgrade the BB

underneath it is pressed into the frame 9C C 4885

I tried to locate the framenumber on the www but could not make any sense :-)

http://4.bp.blogspot.com/-ENmnmrZJwno/To8RNFLTF0I/AAAAAAAAAC0/BUZGZugeSkE/s1600/full+bilde+em85.JPG

It's a 1994-ishTeam Telekom finish, so it's around then. Team bikes used the block script transfers, but yours has the older style (but they were still available in the 90s)
Bracket will be Italian, as will be headset thread.

it is currently in an unuseable state, both quick release skewers are pointing the wrong way.

age and BB size ?

Hi

Just got a beauty named Eddy !

can anyone help with the age and BB specs.

I wish upgrade the BB

underneath it is pressed into the frame 9C C 4885

I tried to locate the framenumber on the www but could not make any sense :-)

http://4.bp.blogspot.com/-ENmnmrZJwno/To8RNFLTF0I/AAAAAAAAAC0/BUZGZugeSkE/s1600/full+bilde+em85.JPG

http://www.cadre.org/Merckx/

Could help.Theoryswine has recently got the exact frame too. Is it a Corsa?

My first post on here, i just picked this up cheap, if anyone has any info it'd be well apreciated.
Best.

/attachments/44688

/attachments/44689

2 Attachments

I have seen some campagnolo gran sport rear-40 and front-32.
it seems they have the center pin (?) missing...
Is it worth buying these in this state?

here is a piture of the hubs i would like to use. Is it a ball ache to get the center pins?

1 Attachment

circa 1965, made in Italy
Size : 54 cm (seat tube, axe/axe bottom bracket) - lenght : 55,5 cm
Bottom bracket : french thread
Head set : french thread
Tube : Columbus ???
Drop-outs Campagnolo, spacing : 127 mn

Size seat post : 26,8mn

thanx :-)

Corsa it is !

circa 1965, made in Italy
Size : 54 cm (seat tube, axe/axe bottom bracket) - lenght : 55,5 cm
Bottom bracket : french thread
Head set : french thread
Tube : Columbus ???
Drop-outs Campagnolo, spacing : 127 mn

Size seat post : 26,8mn

frame picture links no worky.

italian built with french threads hmmmmmm are you 100% sure.

http://www.sheldonbrown.com/velos.html

http://www.sheldonbrown.com/gloss_bo-z.html

http://sheldonbrown.com/harris/headsets/french-headsets.html

Hello gents,
Basically won this bike on ebay for £35. Turned up in a very sorry state. Left plenty of negative feedback ill put it that way.

Anyway it was advertised as a Peugeot. However im in the process of stripping hte paint, and underneath 1 later of dodgy black, and 1 layer of luminous green, there was the original paint... and stickers. Due to using Nitromors i couldnt make out some of them but one definitely said 'Apollo'. So im not sure if they were on there from when it was purchased or not.
Also there's a heart emblem underneath the frame with 3 dots in it, not sure if this means anything?

Here's some pics anyway see what you think...

I picked up this frame today and was wondering if anyone can help identifying the model? I'm pretty sure it's a Carlton, if not someone has gone to extreme lengths to put a Carlton badge and decals on another frame. That said it has had a re-spray at some point as the decals are on top of the paint. Serial No on BB shell reads F7387. Any help greatly appreciated, cheers.

images here:

http://adamluszniak.tumblr.com/

certainly look like carlton lugs, possibly a catalina, but it has wrap round seat cluster.

it could be the road track or franco italia here too but i cant see the fork lugs

my next comment dissapeared, as the thread was merged. but basically i said that i dont think it is one of the ones in that link... but i do think its carlton.

over and out

thanks louis, I looked at that site but couldn't pinpoint it to any specific model. i've posted an image of the forks lugs on the blog. cheers

Does anyone know what brand of lugs these are?

Just picked up this resprayed bike and cant find out what it is..
Especially since it's a Frankenbike; 105, Santé, RSX, Athena, Exage, carbon Sugino 75 levers and these (rather exclusive?) Cinetica Giotto bars..

Late 80's Tange tubing, rear brake cable through tt & Panasonic drop-outs, curved brake bridge.
Judging by the lather and comparing the inner lugs of the fork to other Tange tubed bikes (Centurion, Cilo etc), it probably is a Panasonic, but which?
I can't find out wether it's Tange #1, #2 or maybe even Prestige.

Looks a lot like these 1989 Panasonic P.I.C.S. Team Custom Frame and PICS Team 1200.

Am I right?

Sorry for the shitty iPhotos; dslr battery is flat.

Claud Butler 1960's

What's the frame number and is it on the btm bracket

Just picked up this resprayed bike and cant find out what it is..
Especially since it's a Frankenbike; 105, Santé, RSX, Athena, Exage, carbon Sugino 75 levers and these (rather exclusive?) Cinetica Giotto bars..

Late 80's Tange tubing, rear brake cable through tt & Panasonic drop-outs, curved brake bridge.
Judging by the lather and comparing the inner lugs of the fork to other Tange tubed bikes (Centurion, Cilo etc), it probably is a Panasonic, but which?
I can't find out wether it's Tange #1, #2 or maybe even Prestige.

Looks a lot like these 1989 Panasonic P.I.C.S. Team Custom Frame and PICS Team 1200.

Am I right?

Sorry for the shitty iPhotos; dslr battery is flat.

Pics are decent but need full frame pics and under BB.

Want the bar and stem.:).

S/F<
CEYA!

116 bcd 6 arm any idea what crank it's for?
it'll fit ta 3 arm (and smaller bcds like 54 and 86 with the right carrier obviously)

think i'll be bodging up an 86bcd carrier (or attempting to find a cheap 3 arm SR 165 crank - anyone know if they are same size as TA? ) for something experimental

1 Attachment

Pics are decent but need full frame pics and under BB.

Want the bar and stem.:).

S/F<
CEYA!

Here you go:

Sorry, again iPhotos..

Bar/stem is for sale/trade here.

Anyone know what these are?
That's the Sugino emblem, right?