Any question answered...

...yes well we all know it aint what it used to be, at least thats what The Guardian tells me every morning as i'm chauffeured into my first luncheon of the day at the Hilton where i discuss the state of organophosphates in agriculture, and then my Holidays and the weather with the other chaps from Cambridge dont you know. Hence why one must find other subjects for ones barber appointments....

Really?

Reason I ask is because I know sweet FA about life insurance, and next week I need to know quite a bit about it.

If you wouldn't mind, can I ask you some questions about it?

Do some people have other people freeze their sausages for them?

Good question.

Yeah. Fire away but I must confess to not having been a particularly diligent consumer.

On the SRAM tech page the SL-500 TT shifters are shown as not being Exact Auctuation. Is that really the case? It says to be compatible with Force 22 rear derailleurs which are indeed Exact Auctuation. CRC says yes. @edscoble @mdcc_tester

Did anyone ever listen to a French online internet radio station called something like, one sumer fm.

I'm sure I used to on tune in radio back in 2012. I can't find any record of it.

Ring any bells?

Is Evans east Dulwich open still?
Phone just rings and rings.....

Google maps is saying 9am, ring them in like 25min.

Oceane FM maybe?

Ta. I just had their number and i got no answer yesterday either. So I started to wonder if the internet was w r o ng

I need some gear cable outer casing that will match my brake cables. Any suggestions?

1 Attachment

https://velo-orange.com/collections/cables-housing/products/classic-stainless-braided-kit-derailleur

Anyone happen to know seatpost diameter and seatpost clamp size for a boardman slr 9.2 disc. I appear to have poor google-fu

Only way to be sure.

Only way to be sure.

If you want to be really sure, you'll want the 25-30 and 30-40 bore mics, at which point you might as well get the three piece set so you can check BB30 shell bearing bores properly too. Admittedly it's more than twice what you paid for the bike, but there's no point skimping on tools :)

That’s...so...beautiful

Everything under this link with each other: https://www.sram.com/sram/road/technologies/exact-actuation#sm.001srkjupw0tfhq11df2ez9m1z3me

be careful with 11 speed bar end though, they have ruined some things

I guess you are right. I'm in Amsterdam with a very limited tool selection :-)

https://www.veloduo.co.uk/ also do the same, have bought from them, would recommend :-)

very limited tool selection

A scale rule in whole millimetres is probably good enough, it's going to be 27.2 or 31.6 as I'm sure Boardman has more sense than to spec something weird. For the same reason, the clamp will be 31.8 or 34.9.

Ah cool.. I was 95% it was a 31.6 (it is certainly not a 27.2) but I did find that one that came out was super stiff.. Maybe just too much assembly paste... And I had no idea about clamp size :-)
Thank you

one that came out was super stiff.. Maybe just too much assembly paste

Or just stacked tolerances. The OD on the carbon post should be pretty close to nominal, but the bore on the seat tube probably has quite a wide tolerance range for both circularity and diameter because it is moulded by bag pressure and not reamed to size the way a metal one would be.

Might have some luck here

https://www.lfgss.com/conversations/2805­21/

..wow, what a dark thread. Funny episodes as well; loved the snake story! Followed.

I bought some pursuit bars on here that have been drilled for brake cables by an enthusiastic amateur. Is this safe to ride on?

I'd worry as much about stress corrosion cracking near the clamps as I would about the drilling, but neither fills me with confidence.