Modular polo mallet head design

they look a bit longer than just half an inch on the picture you attached mike....or is that just me or maybe the picture?

Dunno, I'm just going by the measurements Lucky sent me. Kinda like ordering from a catalog, ya know?

If you're swapping two 5.5" for two 6" then all systems are go.

Ok cool, lets put the order in.

Just to confirm mine is 2x6" single cap and 1x5.5" single cap.

Yep yep. Although, you could go for a double capped. 1 of each, 5.5"single, 5.5"double, 6"single?
Sorry to confuse things, just offering options. Thanks for altering your order.

;760767']Yep yep. Although, you could go for a double capped. 1 of each, 5.5"single, 5.5"double, 6"single?
Sorry to confuse things, just offering options. Thanks for altering your order.

No no, you're right. This is a better option, i'm bound to get bored of ball jointing soon!

So:

1x6" single
1x5.5" single
1x5.5" double

Sorted.

Heads are in. I'll have them at Downham tonight...

dante - 1x60mm 5.5" single cap
Khorn - one: 2"x5.5 double cap
Mr Lemon - 1x60 5.5" single cap

Downham tonight?

My Lucky head is going to break soon. I like it a lot more than any other head I've used (I use one of the small, double-ended ones). Does anyone know if they're still getting made or who to get in touch with? An admittedly brief search of .CA was inconclusive.

'lucky' on .ca.

My Lucky head is going to break soon. I like it a lot more than any other head I've used (I use one of the small, double-ended ones). Does anyone know if they're still getting made or who to get in touch with? An admittedly brief search of .CA was inconclusive.

if you're ordering, would you be up for ordering bulk? It should make it cheaper.

otters - 62mm dia, 140mm length, single caps

Cheers Gabes.

I've got in touch - I can do bulk if people want them, I'm easy. I just want more!

From Lucky:

"I've just started work on a new batch to be completed Mid-January. Any clue as to how big or small of a group buy y'all are into, and will it likely be all single cappers, all doubles in various lengths, or what? It'll help me plan the batch."

Any interest?

otters - 62mm dia, 140mm length, single caps
aufbruch - 2" x 5.5", double capped

I only got to use my last one once before it got nicked,

otters - 62mm dia, 140mm length, single caps
aufbruch - 2" x 5.5", double capped
Lemon - 60mm x 5.5 single capped

Indications of quantity would be good (I'm assuming if anyone wants more than one then they'll just say so but just in case)

otters - 62mm dia, 140mm length, single caps
aufbruch - 2" x 5.5", double capped
Lemon - 60mm x 5.5 single capped x2

otters - 62mm dia, 140mm length, single caps
aufbruch - 2" x 5.5", double capped
Lemon - 60mm x 5.5 single capped x2
types (cambridge) - 60 X 5.5 single cap and double cap pls!

You'll have to pick up from London (I'm not getting into posting) and do you mean 1 x single capped and 1 x double capped?

otters - 62mm dia, 140mm length, single caps
aufbruch - 2" x 5.5", double capped
Lemon - 60mm x 5.5 single capped x2
types (cambridge) - 60 X 5.5 single cap and double cap pls!
moog - 2" x 5.5" - double capped x2

You'll have to pick up from London (I'm not getting into posting) and do you mean 1 x single capped and 1 x double capped?

yes no problem, and yes please. if enough are interested in cambridge i'll be the sole 'importer', i've put a note up in our forum letting people know. cash on collection ok?

Yup no problems.

Also - Single caps now only come in one length, 7", without any holes pre-drilled. You can cut it to any length you like and mount the ski pole at any position or angle you like.

might as well make your own and not pay anything for the tubing then.

just for curiosity, how much is one of this?

There does seem very little point for standard yellow pipe sized single cappers.

I love my little double capped head but I don't think I could make anything that light myself ?

I think last time they worked out at about £11 per head. Iive had mine for about 3 months and it's probably going to break soon. I've played on some really shitty surfaces in that time though, after which it has worn down noticeably. If anyone does have any ideas on how to make a really light, reliable, double-capped mallet head then I'd rather make it myself (I have no idea about molecular bonding though).

otters - 62mm dia, 140mm length, single caps
aufbruch - 2" x 5.5", double capped
Lemon - 60mm x 5.5 single capped x2
types (cambridge) - 60 X 5.5 single cap and double cap pls!
moog - 2" x 5.5" - double capped x2
crackfox - 60mm x 6"(or 5.5" if awkward) single capped x2

If anyone does have any ideas on how to make a really light, reliable, double-capped mallet head then I'd rather make it myself (I have no idea about molecular bonding though).

if you can make the caps to the proper size, i think a heat gun or even loctite would work just fine