Polo Bikes

cheers, i'll have a butchers!

front disc only, cable threaded through the headtube. Tidy as f*ck. thank you object and oak.

pix or i dont believe!

    Marino - The original Cheap custom frame

alejandro - Designed by alejandro built by marino, alejandro does all the leg work
Mister X - Italian made, in london alexis has one
Max Power - German made
14 bike
Oak Cycles
Dodici

yeah pics B, I want to do this with my new bike be good to see how you did it.

    Marino - The original Cheap custom frame

alejandro - Designed by alejandro built by marino, alejandro does all the leg work
Mister X - Italian made, in london alexis has one
Max Power - German made
14 bike
Oak Cycles
Dodici - has the best surface for applying stickers to

who wants to set a new trend?

As soon as I get my new wheel I'm going rim and disk break, is that close enough?

Nice, rim-brake engaging first then disc engage at the end to pop that rear wheel up?

i'll take some pics tomorrow the lighting is not good now :)

Marino - The original Cheap custom frame
alejandro - Designed by alejandro built by marino, alejandro does all the leg work
Mister X - Italian made, in london alexis has one
Max Power - German made
14 bike
Oak Cycles
Dodici - has the best surface for applying stickers to
Riding in Circle (700x35 possible) ask Gianluca Rc on Facebook

front disc only, cable threaded through the headtube. Tidy as f*ck. thank you object and oak.

same set up, you can see it better in the pic below. only thing is the clearance is so tight that there is a wee kink in the housing cable to get it clear of the tyre causing a bit of resistance .. on the plus side my left arm will soon be as big as my wanking arm

is there anything out there that can take 700c x 40-47mm and has something like 75 degree geometry?

No...

Maybe charge scissor? Identiti ffx? Leader mordecai? Some kind of fixed trick frame

Ns analog. Eigthinch scrambler?

Bruiser?

29er inbred with 26" forks?

is there anything out there that can take 700c x 40-47mm and has something like 75 degree geometry?

If you can find a bike which is steep AND with large wheels; for a normal sized person it will have to do a few things to avoid the dreaded toe overlap.

They'll all have either a long toptube, a steep seat-tube or tiny cranks. not what you ideally want in a polo bike.

Get Merino to build you one! :)

I think Harvey's bike has a 75 degree head angle and 700c wheels. That's custom though.

BBBam!

Makes takin it apart that much sweeter

absorutry

Barspin goals?

like it B! thinking about it though, i'm not sure there is enough clearance with a max power fork to do this.

what's happened to your rotor protector??