-
• #2652
some bits for sale here:
-
• #2653
The Carlton is now in Manchester
Few quick (not quite focused) pictures here http://www.flickr.com/photos/andrewkirsfelds/sets/72157627152972300/There's a bit of rust here and there and the brake and gear cables should probably be replaced at some point. Brakes and gears might also need a little tweaking, but it seemed fine on the way home.
I think my brother might have tried riding it a bit, I've lowered the stem since the photos were taken and if I can find another spanner I'll put the seat back where it should be!
Both tyres are new and the rear wheel was replaced last year. The guy before me had the BB and crankset serviced but the pedals could do with being re-greased.
I'm up near Ancoats/Islington Wharf, happy for people to take a look, can meet city centre/UMIST/Piccadilly/NQ and such
Still available ? or gone
-
• #2654
.
-
• #2655
Not strictly buying/selling, but does anyone know of any jobs going anywhere? Desperation has taken hold.
-
• #2656
.
-
• #2657
Well i'm a student home for the summer, so i'm after anything and everything, just been handing out CVs and trawling gumtree/craigslist.
-
• #2658
Hi guys im new on here anyone interested in this stuff?
http://i53.tinypic.com/2hzyd.jpg
http://i52.tinypic.com/2rqhzea.jpg
http://i51.tinypic.com/qxwhgp.jpg
http://i55.tinypic.com/2vturyu.jpgBullhorns: some beer
risers: £5
TTs: £50
manky drops: free
sunline saddle: £10
unused schwalbe gumwall 27 x 1 3/8: £10 for pair
fixie pops tyres: £10 for pair
schwalbe luganos used for about 50 miles: £5 for pair
pannier rack: £5 -
• #2659
anyone got a pair of old SPD shoes to get rid of? size 10/11/12?, can be knackered as i want to rip out the bottom plate to convert some Vans to SPDS....
i have some plates knocking about somewhere but just moved house so everything's crazy, will let you know if i see em when unpacking
-
• #2660
Well i'm a student home for the summer, so i'm after anything and everything, just been handing out CVs and trawling gumtree/craigslist.
-
• #2661
Can I take the bullhorns and drops off you for some cans? @chipsriceandacurry
-
• #2662
@chipsriceandacurry if flindt changes his mind on the bullhorns ill happily take them for the fine beverages of your choice
-
• #2663
Can I take the Luganos? Where can I get them from you...? Can collect tonight maybe...?
Hi guys im new on here anyone interested in this stuff?
http://i53.tinypic.com/2hzyd.jpg
http://i52.tinypic.com/2rqhzea.jpg
http://i51.tinypic.com/qxwhgp.jpg
http://i55.tinypic.com/2vturyu.jpgBullhorns: some beer
risers: £5
TTs: £50
manky drops: free
sunline saddle: £10
unused schwalbe gumwall 27 x 1 3/8: £10 for pair
fixie pops tyres: £10 for pair
schwalbe luganos used for about 50 miles: £5 for pair
pannier rack: £5 -
• #2664
Hello all.....
I'm being lazy to save myself the effort of going in to the cellar to take photos to sell these bits. If anyone is interested I can deliver them to Manchester or the 'burbs.
- Volume Cutter f+f (53cm I think) in black with seat post, Charge spoon saddle and BB fitted. I'm 5'8" and it fits me OK. Used for Polo but never abused (except when Woody used to have a go!)
- Velocity wheel set: Front 36h silver, machined. Back 36h black, not machined with Sys Ex fixed hub and 21T. Again used for polo so have a few dings but only cosmetic. Tyres fitted.
- BMX Headset and chopped DMR Wingbars for Cutter, used for polo so solid
- Shimano Sora front brake calliper cabled to Dirty Harry lever for above bars and frame.
Basically a bike minus the chainset. I'm looking for £200 but open to offers if no interest and I may consider splitting if the frame goes.
Cheers, Wayne.
- Volume Cutter f+f (53cm I think) in black with seat post, Charge spoon saddle and BB fitted. I'm 5'8" and it fits me OK. Used for Polo but never abused (except when Woody used to have a go!)
-
• #2665
.
-
• #2666
I think someone was after lights, they're selling off Knog Frogs for £1.97 each on Best Buy (free delivery) normally about £6 each online and okay for around town use
The lights (and the rest of their clearance bike stuff is here:
http://www.bestbuy.co.uk/Catalog/Browse.aspx?Path=&SearchKeyword=bike&ResultPageNumber=0&CategoryId=&SortBy=&SearchType=GlobalKeyword&SearchResultsLayout=ListLayout&NumberOfResultsPerPage=99thanks andy for the info.
-
• #2667
Add a rear U-brake plate and this is an awesome polo bike.....!
Hello all.....
I'm being lazy to save myself the effort of going in to the cellar to take photos to sell these bits. If anyone is interested I can deliver them to Manchester or the 'burbs.
[]Volume Cutter f+f (53cm I think) in black with seat post, Charge spoon saddle and BB fitted. I'm 5'8" and it fits me OK. Used for Polo but never abused (except when Woody used to have a go!)
[]Velocity wheel set: Front 36h silver, machined. Back 36h black, not machined with Sys Ex fixed hub and 21T. Again used for polo so have a few dings but only cosmetic. Tyres fitted.
[]BMX Headset and chopped DMR Wingbars for Cutter, used for polo so solid
[]Shimano Sora front brake calliper cabled to Dirty Harry lever for above bars and frame.Basically a bike minus the chainset. I'm looking for £200 but open to offers if no interest and I may consider splitting if the frame goes.
Cheers, Wayne.
-
• #2668
Hello all.....
I'm being lazy to save myself the effort of going in to the cellar to take photos to sell these bits. If anyone is interested I can deliver them to Manchester or the 'burbs.
[]Volume Cutter f+f (53cm I think) in black with seat post, Charge spoon saddle and BB fitted. I'm 5'8" and it fits me OK. Used for Polo but never abused (except when Woody used to have a go!)
[]Velocity wheel set: Front 36h silver, machined. Back 36h black, not machined with Sys Ex fixed hub and 21T. Again used for polo so have a few dings but only cosmetic. Tyres fitted.
[]BMX Headset and chopped DMR Wingbars for Cutter, used for polo so solid
[]Shimano Sora front brake calliper cabled to Dirty Harry lever for above bars and frame.
Basically a bike minus the chainset. I'm looking for £200 but open to offers if no interest and I may consider splitting if the frame goes.Cheers, Wayne.
aking? got a spare £200?
-
• #2669
Or even Nesbit...?
aking? got a spare £200?
-
• #2670
Can I take the Luganos? Where can I get them from you...? Can collect tonight maybe...?
2nd dibs if Adam doesn't take them!
-
• #2671
Hello all.....
I'm being lazy to save myself the effort of going in to the cellar to take photos to sell these bits. If anyone is interested I can deliver them to Manchester or the 'burbs.
[]Volume Cutter f+f (53cm I think) in black with seat post, Charge spoon saddle and BB fitted. I'm 5'8" and it fits me OK. Used for Polo but never abused (except when Woody used to have a go!)
[]Velocity wheel set: Front 36h silver, machined. Back 36h black, not machined with Sys Ex fixed hub and 21T. Again used for polo so have a few dings but only cosmetic. Tyres fitted.
[]BMX Headset and chopped DMR Wingbars for Cutter, used for polo so solid
[]Shimano Sora front brake calliper cabled to Dirty Harry lever for above bars and frame.Basically a bike minus the chainset. I'm looking for £200 but open to offers if no interest and I may consider splitting if the frame goes.
Cheers, Wayne.
i want an awsome polo bike,
i'll think about it for sure though got to see whats happening with cash and tax back and ebay etc etc at all that.
-
• #2672
Hello all.....
I'm being lazy to save myself the effort of going in to the cellar to take photos to sell these bits. If anyone is interested I can deliver them to Manchester or the 'burbs.
[]Volume Cutter f+f (53cm I think) in black with seat post, Charge spoon saddle and BB fitted. I'm 5'8" and it fits me OK. Used for Polo but never abused (except when Woody used to have a go!)
[]Velocity wheel set: Front 36h silver, machined. Back 36h black, not machined with Sys Ex fixed hub and 21T. Again used for polo so have a few dings but only cosmetic. Tyres fitted.
[]BMX Headset and chopped DMR Wingbars for Cutter, used for polo so solid
[]Shimano Sora front brake calliper cabled to Dirty Harry lever for above bars and frame.
Basically a bike minus the chainset. I'm looking for £200 but open to offers if no interest and I may consider splitting if the frame goes.Cheers, Wayne.
Dude, can I try that out? very interested! do you work in evans. think i've met you already, was talking to you and rich about polo
-
• #2673
J Flindt yeh 4 cans of strongbow and ill throw in the duct tape and brake lever! wheres good to meet im down in withington, where you based?
dangeruss yeh no worries you anywhere near withington?
-
• #2674
I'm in Hulme, but if i get a chance i could make it to Withington later... can i just double check what size they are 23mm/25mm?
J Flindt yeh 4 cans of strongbow and ill throw in the duct tape and brake lever! wheres good to meet im down in withington, where you based?
dangeruss yeh no worries you anywhere near withington?
-
• #2675
yeh should have mentioned theyre 23
are they still there?
just looks like a neat way to store bikes.
also does any1 know of any resonable sub £10 lights for front and back.