-
• #70252
Liking the fork decals matching the frame, nice touch.
-
• #70253
maybe a long shot....
dose any one have a pair of large used cheap 700c tyres, 35c +, just some worn out tyres to get me through the snow for a few days.
i know a place that can dispose of them properly to
-
• #70254
How did you bodge the front mudguard with a track fork? P-clip? VeloOrange?
Found the frame build up as a roadie. Fork is drilled. And not so much a track one... Good for mudguards though!
-
• #70255
Nice front guard ed. But if you're doing flaps do the back too, be kind to people behind you.
-
• #70256
That was the last one in stock from SJS unfortunately, I'd like my feet to be dry first without overshoes.
-
• #70257
That Kona is nice.
Sort of makes me wish I'd splashed a bit more cash with on my CX build (not that I'm unhappy with it at all!).
-
• #70258
bought this
for attempt No.2 at MTB run around project. I'm thinking 9 speed rear, triple front, swept back bars, v-brakes, front rack and mudguards. -
• #70259
What sort of running around needs 3x9 drivetrain? 32t single front x 11-32 rear should be ample for non-racing purposes.
-
• #70260
might do that, I figured I'll still need a chain guide to stop it dropping so may as well have another chainring or 2 there too.
-
• #70261
Big City Bruiser thread>>>>>>>
why u no single speed and fatass tyres?
-
• #70262
Sumo I'd take the setapost and stem off you, if you dont want em
-
• #70263
I'll still need a chain guide to stop it dropping
Not really, unless you're going to do actual mountain biking. Still, a fixed chain guide is a lot less maintenance, expense and weight than a front dérailleur, a couple of chainrings, a LH shifter and the associated cabling. Also (not so much a gratuitous plug as an idea to copy) you can put a guard ring on the outer position which solves most potential chain drops and also helps to keep your trousers out of the chain.
-
• #70264
sumo you should run 1x9, do you really need a tripple on your 4km comute?
-
• #70265
do you really need a trippple on your 4km comute?
ftfy
-
• #70266
do you really need a[B] tri[B]ppple[/B][/B] on your 2.4km comute?
fixed again
-
• #70267
(not taking the piss, mine is only 600m more)
-
• #70268
I find using a front mech with a single ring helps keep the chain on, maybe leave a friction shifter to adjust it slightly to stop it rubbing when you go from the big to small cog.
Cheap bodged solution?
-
• #70269
Just use a reflector bracket to stop the same chain from coming off.
-
• #70270
Surely an SS chainring around town will be enough(?).
That's what I'm planning. 3x9 plus a massive cassette is just too much for London.
-
• #70271
New bike time!
Hate on the saddlebag and bottle/cage all you like - that's how I'm gonna ride it so that's how the bike looks (aside from another cage during the summer and long rides).
Still working on getting it all set up - I think I'm gonna end up with a shorter stem (maybe 100 vs the 110 that's on there now) and the saddle has gone up and back slightly since I took this. I have a proper bike fit session in a couple of weeks so I'm sort of holding out until then...
-
• #70272
Just use a reflector bracket to stop the same chain from coming off.
Nice idea, thanks Ed
-
• #70273
Surely an SS chainring around town will be enough(?).
This^
One of those deda fang things and a bashguard if you're worried, or a cheap keeper from Superstarcomponents. Either way, you can just add one later if the need presents itself.
One thing to remember is that a 1x9 set-up only requires a short cage rear mech. Which will be stiffer than a long cage, and likely give better shifting.
-
• #70274
1x9 it is then. I was thinking of getting a road hub built into a 26'' rim as the spacing is 130mm, so a short cage mech should be fine.
-
• #70275
Glad someone bought that GT, I PM'd Tommmmmmmm with it a while back saying it was better than his and he should buy it...
I'll have a single ring Truvativ husselfelt MTB crankset with bash guard and 31 or 32 t ring to shift next week if interest....
Not sure why spacing would affect using a short cage mech, that is decided by range of the sprockets really.
Saying that I've run a short cage road mech on MTB 9 speed 11-32 block without drama...
Kona is the bees kness.