Transmission database - for all your crank / bb / bottom bracket questions

Hi, guys, do you think it is a good idea to drill couple small drain holes in the center of bb shell?

I just bought a hand down crankset, the "cinelli mystic" 165(?).
I'm looking to install it on my mash bolt 2011 green but I can't find any info on which bottom bracket lenght to use to get a good chain line. Can you help me with this?
I have a halo/cinelli rear hub it that helps?

maybe I've got the name all wrong.

I tired to search but unable to find any info.

Which english BB i need for Suntour Cyclone cranks to get 42mm chain line ?

What octalink BB does one need to get a 44mm chain line with DA 7710s?

Just won these scabby cranks on eBay, can anyone tell me which type of bb I need and in what length for a standard track chai line?

Looks like an octalink?

Any definitive answer? Want to order one today

Anyone?

ISIS afaik

Yeah it is but I'm unsure which length

Anyone know what cog's I can put on a Gipiemme Special Pista hub? Normal? Same as Campag? Been ages since I've done this....

Pretty sure all cogs have the same thread - you just need to get the correct thread pitch on the lockring

Just won these scabby cranks on eBay, can anyone tell me which type of bb I need and in what length for a standard track chai line?

if you took a picture of the other side and the bb / crank interface it might be easier to tell

Pretty sure all cogs have the same thread - you just need to get the correct thread pitch on the lockring

Cheers dude... think I had a surley on my Campag Record ones at one point, maybe even still, and I doubt they are a special thread...

new chain and cassette fitted and gears setup by bike shop but when I stand up out of the saddle in the little ring, the chain is 'slipping' when I push down with force

this is both annoying and potentially dangerous (have already bruised my knee, banging it into the bars when the chain slipped on a steep hill)

how do I stop this happening? do the chain and cassette wear into each other? adjust the b-screw?

@mark1mark, probably too late but I run a 109.5mm ultegra octalink BB with 7710s and a Goldtec track hub which is a 45mm chainline - it's spot on with a 3/32 chain and White Industries freewheel.

Omniums with BB spacer a really bad idea?

Does anyone have a Phil Wood bb tool I can borrow this weekend by any chance?

Omniums with BB spacer a really bad idea?

Yes. Terrible idea. Shot a BB trying that and nearly ruined the threads on the frame. You can only use spacers on an MTB frame.

Have had a single 1mm spacer on the driveside for a couple of days, guess it's time to remove it.

I'm looking for a 109mm ISO taper, Italian threaded BB. Seem to be impossible to find.

Campa Record Pista chainset on a JIS 107mm UN54?

Phil wood with ITA cups?

Both valid replies but can't afford Phil on this build, And I already have the chainset (Sugino 75) haven't had experience with the whole using a JIS taper and under shooting by 2mm. Does this genuinely work?

^Sugino 75 and Campa Veloce BB works as the Transmission database states.