Mudguards

p clips?

Thanks but what is a p clip?

Seriously? Do you even google bro?

https://www.google.co.uk/search?q=p+clip&rlz=1CDGOYI_enGB590GB590&hl=en-GB&prmd=sinv&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjVnYCo8rvQAhUpDMAKHft4BHUQ_AUICCgC&biw=414&bih=660

They go on the fork and the rear stays what you saying?

How about drilling the PDW QR holders?

P clips on stays and fork is better in time of puncture.

It is a pain but it can be done. I managed it for my Goldtecs but not sure about your axles.

These are back in stock if they are of use. Will be ordering a set to replace my drillium efforts.

https://www.sjscycles.co.uk/mudguards/axiom-mudguard-axle-runners-set-of-4/

Not so good for carbon forks though.

You think these large enough to drill for my hubs? Would be brilliant.

http://bike.shimano.com/content/sac-bike/en/home/road/wheels---hubs/front-hubs/hb-7710-f.html

P-clips, just get some p-clips.

No. It looks like they are for M5 sized bolts. Drilling them out for that axle will probably not work.

I have those hubs on my Merican. They are nice though.

Why not; would only need around 5mm more?

I'm not sure how much material will be left on the mount. I have no direct experience with them I'm afraid.

I can say that unless you have a proper drill press you will find it a complete pain to enlarge the holes. My attempts to do that with the PDW mounting eyelets is not one I'd like to ever repeat.

Time you spend doing that, can easily be finished with a p-clips.

Since I seem to be the only one paying attention to your front wheel woes - what fork do you have? Will the shape accept p-clips? My carbon fork does not so I am only left with the axle options. It would work on my rear stays though.

Very much appreciated. Easton fork. Still optimistic about the drilling.

that sucks .. take it to SBC, mark is a mudguard wizard .. still stick with P clip at the back.

Which Easton fork? I can able to fit large P-clips that's shaped to fit the fork.

Already there.

I have an SKS XTRA-DRY X3 for a mountain bike going for a beer if anyone wants it. Discovered in the recent downpours they are fuck all use on a road bike. Pickup in Deptford.

anyone looking to sell some 30mm PDW?

Am I right to think that the PDW are useless if you want to run either 25 or 28mm tyres? Those are too big to fit under the 30mm PDW yet the larger size PDW are way too big. Correct?

You might get a 25 under there if you're very careful in fitting, but you won't get a 28.

I have a 28 under one.

UTFS

Would you mind uploading a pic? Would like to see how well it covers