LOOK - Look at them!

Look is pretty good at answering emails. Try those emails to get your answer:
info@lookcycle.com
siteinternet@lookcycle.fr
Luc LUTSEN llutsen.lci@gmail.com

Merci

Bought this last year after spotting its twin at HHV, still haven't got round to riding it yet.

1 Attachment

Lovely. Very high on my wishlist.

I reckon this is a good buy for anyone after a 565

1 Attachment

^ indeed, a very nice 565, I've got the same colour in a 555 Origin.

And hello all - newb on the forum but have ridden look for 10 years. Just spotted they will be sponsoring Cofidis for 2023...from their email/Facebook feed:

"We are proud to announce that we will be returning to the UCI World Tour with Team Cofidis for 2023! #lookcycle #LOOKxCofidis #teamcofidis #CofidisMyTeam"

Not sure if that means new models or just team colours for 2023...

they will be sponsoring Cofidis for 2023

Does that mean my Cofidis/Look team kit is back in fashion? #fkw

I hope they will stay on Campagnolo. Cool for Look, but Cofidis already had cool bikes (De Rosa)!

Anyone had any experienced with the lobe Zed crankset?

Currently want to switch from 172.5 to 170 but cannot get the larger lobe internally from crankset out. Looks like there is a lot of grit and muc caused thing the to be a little stuck.

Is there a release agent or just brut force will work? Just worried about damaging the crankset.

I've used a mallet and allen key end to tap the lobe out before, but ideally get someone to hold the crankarm.

I’ve never had them stuck before. No special locking mechanism. I would try doing it with the pedal in but without the washer, hitting the centre and less likely to damage the paint/carbon/lobe.

Thanks @MinuteFong @cjr

But @cjr this worked like a charm, little best trick in the book. Can finally enjoy the bike now with my short legs.

X

Made it up as I was responding, glad it worked!
Edit, I did pop down to the basement and check I wasn’t talking total crap before actually posting.

Anyone got any epost spacers they can spare ? I have not been able to source any easily. After one or two thin ones..
:)

I have a section of e-post you could make a custom spacer from

Thanks dbr, that may be a solution, I am in the situation where I cut my epost , but it is a little bit long . Figured next time I cut it I err on the top short side and have a small shim handy . Will hold out for now for a small ready made shim, as I do not have the tool to cut this thing myself ,,

https://www.swinnertoncycles.co.uk/look-spares-seatpost-e-post-elastomers-3-colours-spacers-kit-inner-outer-spacers-p18170

Which colour you looking for?

Thanks for link. I actually spoke to swinnertons and they offered to order some in, talked about 3 months back order .
I actually have the elastomers , look importer sent me some , it is the actual spacers I need .
Might be speaking to swinnertons again..

I have some - how many you need?

I doubt there's many of them at Herne Hill so hello twin!

It really is a lovely bike, bought it on here.

Same answer as other people, I too spares and not going to use them anytime soon.

Hit me up if you want some.

https://www.ebay.co.uk/itm/403742759414?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JLbXychfSa2&sssrc=2349624&ssuid=9cfbyGwdQ6K&var=&widget_ver=artemis&media=COPY

Nice.

https://www.ebay.co.uk/itm/364040140630?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=dSJ5kL8SR_K&sssrc=2349624&ssuid=sddhWk0WRkS&var=&widget_ver=artemis&media=COPY

1 Attachment

Probably the last look for the stable:

5 Attachments