You are reading a single comment by @JB and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Tadpole
Zeeburg
swedeee
@JB
Here’s a better photo from my current project thread.
It has the same rake as my Enve at 50mm. The Enve had a 367mm A-C but we went with 370mm on the steel fork to ensure it could clear a 30c tyre, over the Enve’s 28c max (which they now state is a 25c max). This 3mm change slackened my head angle from 71° to 70.8° which is totally negligible.
@tadpole it was made by John Fitzgerald, previously of Rock Lobster and now Fitz Cycles. We used Columbus .9mm 28x19 oval blades with an Allotec crown. Powder coated black with a satin clear coat.
It totally transformed the feel of the bike. Compliments the smooth ride quality of the Ti frame way better than the Enve did.
1 Attachment