Power Meters / Powermeters (SRM, Powertap, Quarq, Ergomo, Vector, Stages, power2max, P2M, 4iii, InPower, Cinch)

I didn't have the battery flat warnings so not sure we have the same problem.

I didn't solve mine as such, but I came to the conclusion that its most likely an indoor training only problem, due to all the interference from all the WiFi and Bluetooth and whatever else is going on in my block.

Back to your issue though, firmware update sounds like a good bet. I didn't realise the app was android only. Got a friend with android? If you're ever out South East way happy to help using mine. You need to register it first though

How does one actually register the device? I could never find this on their website.

I think I did it with the app. Needed a serial number on the box

Android Emulator? https://developer.android.com/studio/run/emulator.html

https://www.androidauthority.com/best-android-emulators-for-pc-655308/

If you're really stuck I probably have some spare Android phones kicking around I could send or deliver if I'm out your way... #deliverance

https://www.youtube.com/watch?v=2IzeQko3ML4

The serial number is written on the cranks of the Powerbox, which is the same as the NG Eco and suffers the same shit with the battery warning. I’ve never had a dropout though.

I am an apple 🍎 sucker

May have to see if other half’s pc can emulate android

Look at the list - there's at least four that say they're compatible with Crapintosh.

Leg aids confirmed.

Right thigh 1 inch bigger circumference with greater muscle development right calf 1/4 inch bigger.

Curiously it’s the leg I had cartilage surgery on, maybe went a bit overboard on the physio!

So it stands to reason that if I work on my left leg to match my right, then my power should come up? (Obviously alongside aerobic improvements too)

Will get to test out my new, and first, PM this Sunday. Ended up going for the Quarq DZero.

1 Attachment

Shiny

I’m going to get some Vector 3’s I think, who has seen best price for these?

Worked perfect. Nice suggestion.

have tried nox and blue stacks and neither have worked.

does anyone have experience of these android emulators for mac?

Who here has replaced the bearings in their Powertap hub? @hippy ? @danstuff ?

Yeah, on the older types.

I have a set of double-sided Vector 2 pedals for sale. Just not using them. They don't have many miles on as I had a set of the originals, they went in for a warranty issue, and some 2s came back out...

I have. They are made by Novatec so treat as any other cartridge bearing hub

https://www.youtube.com/watch?v=fS_BL1b2wns

Oh wow, that looks very easy - I'm not precious about the hub anymore so will give this a go. Any idea on the code of the bearings you used?

I've done the NDS bearing on a 2012 Pro hub. 6802 Enduro bearing, and it was pretty straightforward.

Also on the older type, twice but never myself, a well known shop near Kingston did a crap job first time but second time around London Cycle Workshop in Hammersmith really knew what they were doing, were cheaper, faster and didn't blame the hub for not seating the bearings properly.

Is it an old one? If so I bought a packet of 10 of those bearings so definitely have some still.

Think this might be for the newer G3 hubs or the old hubs with G3 conversion I can't remember.
https://www.lfgss.com/conversations/220849/?offset=7300#comment12966817

It was these bearings I bought:
10 pack 61901 2rs [6901] 12x24x6mm Thin Section SEALED HIGH PERFORMANCE BEARINGS
http://www.ebay.co.uk/itm/like/370784585226?clk_rvr_id=1503160838782&rmvSB=true

I used a 17mm socket to seat the bearings but using a QR skewer is probably a slightly nicer way.

Why don't Wiggle have the Vector 3?

good pedals, I have but I feel like I dont need them ..

Is it an old one? If so I bought a packet of 10 of those bearings so definitely have some still.

I think it's a Powertap Pro, like this:

which I can only assume uses the size same bearings...