60% OFF EVERYTHING: Stems, bars, posts, rings, cassettes, mechs, Dura Ace 7900 group, wheels

Thread closed!! Everything is gone and I have moved country. Thanks for clearing me out.

60% off everything.

Big things: Collection only from N16.
Small things: Collection or I can post.

Chainrings:

Gebhardt 1/8" 135mm BCD 44t, a little visible wear but not much - £10 £4
Stronglight 130mm BCD 50t, intended for 8sp, new, - £15 £6
Campagnolo 135mm BCD 52t, for 9sp(?), a little visible wear but teeth in nice condition - £15
Stronglight Alize 130mm BCD 61t (ha!) for 9/10 sp, new - £15

.

Bars, for quill stems:

Cinelli Giro D'Italia 40cm ctc 26.4mm, small marks no scratches - £10 £4
Italmanubri Mod Italia Super Training 26.0mm, scrathed on one side - £free
Cinella Criterium 42cm ctc 26.4mm no scratches - £10 £4
Cinelli Eubios 40cm ctc 26.4mm - £10 £4
Deda piega, 40cm ctc, 26.0mm, anodising sanded off, fine matte silver finish - £10 £4
Bontrager SSR, 40cm ctc, 26.0mm - £10 £4
Cinelli Giro d'Italia, 42cm ctc, 26.4mm - plus Cinella 1A stem 90mm, lil scratch on top, engraving nice - £20 £8

.

Bars, OS:

Deda Presa Carbon bars - 31.7mm clamp - 44cm ctc - £40- £16
Giant Alu Contact bars - 31.8mm clamp - 42cm ctc - £10 £4
Deda Crono bars - New - 31.8mm clamp - 40cm ctc - £20
Profile Design AirWing - 31.8mm clamp - 42cm ctc - £10 £4

.

Stems:

Profile 064 Chromo stem - ultra-lightweight 110mm 26.0mm - £20 £8
Nitto Dynamic 10cm 26.0 - £25 £10
Cinelli XA 120mm - 26.4 - £10 £4
Italmanubri (ITM) Eclypse - Could use a polish- 110mm 25.4mm (slightly wider at some angles) - £10 £4
Cinelli 1A Black 110mm 26.0mm - £15 £6
Nitto Dynamic 10cm 26.0 - £25 £10
Deda quill adapter - black - £free
Ritchey Carbon WCS - 1 1/18 steerer- 120 mm 6-8degrees - 31.8mm - £35 £14
No brand black stem (silver face plate) - 1 1/8 steerer - 26.0 mm bars - £free

Seatposts:

KCNC Ti Pro Lite Black Inline post - 255mm rails to end, 27.2mm - £25
USE Evo Inline Carbon post - Unused - ~400mm rails to end - 27.2mm - £35 £15
No-name black post 350mm rails to end 31.6mm - £8 £3
No-name black post 355mm rails to end 27.2mm - £8 £3
FWE black post 300mm rails to end, 27.2mm, scratches on on lowest 130mm - £8 £3
USE Alien Carbon post with two heads (old two bolt for alu rails, new "cyborg" single bolt for carbon rails) - 350mm rails to end - 25.0mm, proper USE shims for 27.0mm and 27.2mm - £30
Colnago Carbon post (Extreme Power era) - 265mm rails to end - 31.6 mm - £40 £18

.

Fancy bits (some bits are not fancy)

Concor saddle, VGC - £15 £6
Shimano cassette, 7sp, new - £free
Shimano HG50 cassette 9spd 12-25 new - £12 £5
Campagnolo Record cassette, 10sp - full titanium - 12-23t, 156g, VGC / v little wear- £75 £30
Shimano 105 cs-5700 cassette, 10sp, 11-28t, VGC / v little wear - £15 £6
SRAM Red cassette, 10sp, 11-23t, 155g, VGC / v little wear- £35 £14
DMR bikes rigid chain tensioner - £8 £3
Ultegra rear mech RD-6700 - £17 £7
Campagnolo Chorus front mech - 9spd - £10 £4
2 pairs Kool Stop Thinline salmon V-brake pads, new - £15
TRP brake levers, pair, need to find second lever! - £15
Shimano 600 tricolour brake levers - hoods tatty - £free
Shimano SPD/flat combo pedals - £12 £5
Shimano PD-A520 pedals - £15 £6
Suntour Sprint front brake - £15 £6
Campagnolo Chorus headset 10sp era - £25
Vision TT brake levers (lightweight), fits over vision bars or into any bars with plugs - £20
Shimano Bar End Shifters - Dura-Ace SL-BS79 10 Spd, scuffed, light corrosion - £20
Campagnolo cranks, 10 speed square taper, Chorus? Veloce? - £donation

.

Dura Ace 7900 Groupset - 10 speed

Generally very good condition across the groupset, chainrings looking healthy, chain is quite new and the Sunrace cassette (11-25t) has not had much use either.
Compact 50-34t, 172.5mm cranks in excellent condition.
Shifters and hoods nice and clean.
Brakes and braze-on FD excellent condition.
Some rub on the rear mech, small scratches on the big chainring.
I might need to keep the brake pad inserts (for alu)! But if you need carbon friendly pads you can have those :).
The included BB is ITA, but any Shimano Hollowtech BB will work.
£380 £152

.

Tubular wheels

More pictures of these wheels, which are annoyingly not quite in order.

RESERVED Mavic Montherely (sp?) Route x Malliard 600 hubs x Regina Oro freewheel
Minty fresh condition.
Tubs not glued. Rims look unused, hubs too. NOS with a little storage wear?
£70 £60 without tubs
£25 for the Conti Giro tubs
£90 £75 wheels + tubs

.

Mavic Cosmic tubs - Do you like Shamals but don't like selling organs? These are your wheels.
Pair: Very little wear, flat braking surfaces, shiny shiny. One intact tanwall tub, one quite dead tanwall tub. Shimano freehub. £70 £28.
Single: Very little wear, flat braking surfaces, shiny shiny. With usable Gatorskin tub, has a cracked dust cap (known issue with Cosmics). £40 £16.

.

Campagnolo Record 9/10/11 hubs on Mavic Reflex rims - £145 £58
Sapim spokes, very nice clean condition. Both braking surfaces flat, anodising not quite gone from rear rim. Price is basically just for the hubs - the tastiest of all Campagnolo hubs?

Clincher wheels
More pictures here.

These two are not quite a pair but look like it. I had a few rides on them on my Vernon Barker, and one ride on my Colnago. I am now switching out to shiny alu rims. I will likely regret selling these. Very little wear, braking surfaces perfectly flat, hubs smooth.
Front: Giant SLR1 carbon clincher, 620g including tape. 30mm deep, 17mm internal width. £110 £44
Rear: Light Bicycle R35 rim with braking grooves on a Bitex RAR9 hub, Campagnolo freehub. 753g. 35mm deep, 19mm internal width. £165 £64

.

Rear carbon wheel: Light bicycle rim on a Hope Mono Pro III wheel. £145 £58
45mm deep, 19mm internal. A stiff, strong wheel and about 800-850g. Campangolo freehub but I have the Shimano freehub body someplace. Braking surface is still flat but is discoloured, hub smooth.

.

Corima carbon wheel (destickered) - £65 £55 SOLD

.

Vision t30 (Team 30?) alu clincher wheels - £125 £50
Excellent condition, very light and fast aluminium wheels. Braking surfaces flat, hubs smooth. Shimano freehub.

.

Climbing wheelset: Kinlin XR200 on Bitex/Taiwanese hubs - £150 SOLD

.

Wolber T430 Alpine rims on Campangolo low flange hubs - £75 £30
Decent condition, braking surfaces flat. Dark grey anodising is looking nice. Hub smooth but could probably use a service, rear axle cones need tightening at the very least. Includes the Shimano freewheel with nice usable range.

.

Wolber Gentleman 81 Super Champion rims on Suzue low flange QR hubs (Japanese) - £45 SOLD
Braking surfaces good, bearings good. Would scrub up real pretty after rubbing with some wet steel wool. Regina Oro freewheel in decent condition.

.

Shimano RS front clincher, black - £20 £8
A perfectly acceptable training wheel! It will not let you down! Braking surfaces good if slightly concave, bearings good. Much of a Shimano QR lever included, but not the nut! Gatorskin is usable, just. I think the tube is flat.

.

Black clincher - £15 £6
Another perfectly acceptable training wheel! Braking surface flat, bearings good.

.

Rigida Chrina rim on silver hub - £15 £6
Really quite acceptable. Braking surface is a little concave. Bearings good.

.

Mavic T221 rim on Shimano hub - £15 £6
Eminently acceptable! Tyre not good. Braking surfaces good, hub good.

.

Also:
Ultegra 8 speed hub on Open Pro (I think) rim. £ Free. Picture. Freehub pawls are not engaging on the hub body, so it freewheels in both directions. Needs an overhaul.
Beater 700c wheel. Rust on hub shell but everything works. £ Free. Picture

@hippy brake pads^

@PhilDAS ritchey stem^

You have PM

I’ll take…

Kool Stop pads
TRP levers

DMing…

Kool stops and TRP levers sold

Goddamn it always too slow ! Haha. (Also goddamn it koolstop pads are too expensive).

Cheers. Sorted for the moment. If @TheBonk pads don't work I'll revisit.

PM’d re: bar end shifters, levers, and deda crono bars

Hi, if you come to splitting the groupset I'd like to know a price for the chainset please

Hi, are you still planning on selling/sharing wheels? I’m keen to see what you have!

Interested in 7900 shifters and dérailleurs if you split the groupset. Let me know if you have a price in mind (posted). Thanks.

Alize 61t chainring sold.
TRP levers sold.
Kool stop pads sold.
Vision brake levers sold.
Deda Crono bars sold.
Dura Ace bar end shifters sold.

@user150957 I cleaned about 13 pairs of wheels today and will photograph/list tomorrow hopefully. All wheels are rim brake. I've got two pairs of carbon clincher wheels, several pairs/single alu clinchers, and also a few pairs of tasty alu tubular wheels.

Dura Ace 7800 interest is noted, thanks. Someone may yet come to nab the full groupset, let's see what this week brings.

Amazing thank you, I’m on the look out for track clinchers, hopefully you’ll have some!

Very interested in cranks and a chainring... Will PM.

Wheels added, 26 wheels to be precise. @user150957 no track clinchers sorry!

I will be adding soon:
Vintage French bits like Stronglight cranks and Simplex mech & downtube shifters.
Dura Ace 7800 cranks
CNC Fouriers / Planet X brakes, 200g pair
Brooks swallow shape saddle
Conti Attack & GP4000 tyres, 23mm.

Campagnolo Chorus headset 10sp era - £25

1" threaded?

Yes sir.

OK, count me in. PM incoming.

No postage right?
Keep looking at those kinlins.

If you could somehow get a wheelbox to me then I'd be happy to pack em up.

Sold:
USE Alien post
Campagnolo chainring and cranks

Price chops! I have chopped:

10% off Dura Ace 7900 groupset £380 £342
20% off tubular wheels
15% off clinchers (including carbon wheels)

Sold:
Kinlin wheels
Corima front wheel

Back on sale:
Campagnolo square taper crank + 52T ring (also found some SS bolts for it)