-
• #2
ebay item 203187597732 new rear with a 135mm FH RM70 hub on a 700C rim for £48 posted, if you use the code Jan10 you'll get it for £44 posted
-
• #3
thanks. this is a good shout in principle, but as the recipient rider is small in size, the 1.3kg weight for the rear only is a bit of a push.
-
• #4
I have a set of cheap Aksiums, but they are 130 oln, not sure about converting?
-
• #5
I have some Mavic MA3 on Shimano Tiagra hubs if they’re of interest? T
-
• #6
seems to to be a bit difficult to convert, i'm afraid.
-
• #7
thanks for offering. do you have a photo of the rear hub showing the axle type?
-
• #8
I can’t get to them in daylight hours ‘till Saturday. I’ll get some pics then if that’s ok? T
-
• #9
yes, that's fine. no rush from my side.
-
• #10
Sent you a dm with some more details.
-
• #11
@Tadpole I might be interested in those if @launchpadboi isn't.
-
• #12
that weight is including the skewer BTW so take another 120+g off that. Even to something like a 32 spoke Dura Ace 7700/Open Pro it's only c.250g heavier, is that really going to make any real world difference even if they are lifting the bike up? The Tiagra/MA3 offered will be circa 1100g WITHOUT a skewer.
Just so you have a weight comparison to the one I linked to.
good luck -
• #13
you're welcome to have them as they didn't entirely fit my brief.
-
• #14
Did you get sorted? I have a set of barely used MAVIC Aksium S wheels and MAVIC Aksion 25c tyres..
-
• #15
negotiating for a pair atm, but not set in stone yet. is the rear 135mm? if not what's the hub?
-
• #16
Just re-read the thread, are you after track wheels? Mine are standard road wheels.. yes back is 135mm QR..
-
• #17
standard rim brake road wheels are 130mm, are you sure they’re 135mm?
track wheels are 120mm. i’m after rim brake gravel/touring wheels with old mtb/modern disc brake gravel rear spacing (135mm). these aren’t really readily available in 700c.
-
• #18
I've just checked and these are 130mm I think. Just removed from a cube peleton. Wheels are like new with very limited use..
3 Attachments
-
• #19
Those calipers look like they're showing 130mm (or 131ish).
-
• #20
looks like they have mavic hubs, which there aren't really axle conversion kits for. this deems them irrelevant for this thread.
-
• #21
Yeah realised this.. need new batteries.. lol
desperate for sub £150 wheels for a trek multitrack build. i know 135mm is hen's teeth so realistically with a 130mm rear hub that could be converted with end caps (hope, dt swiss etc) or with a longer axle (shimano etc). preferably something wider than vintage racing internal. not fussy on colour or condition as long as they run. thanks.