Hulsroy's Hustle

This

5 Attachments

Perfect! I was just searching for it myself.

Is it just a seat pin bolt that you've tapped the inside of?

No. It is and M8 bolt where I have cut off the threads and made an internal M6 thread. And turned down the head of the bolt and given it a small chamfer to fit the crank arm better.

But you could probably get away with modifying a seat pin bolt.

Thanks for the info!

your method is definitely beyond my capability and resources.

I'll have a go at bodging something else.

I mounted the rack. Didn't fit very nicely so I bodged a brass spacer. Will redo it tomorrow.
Dynamo is hooked up and bag and decaleur fitted.
There is something weird going on with the stem angle but +10° and 100mm should be comfortable albeit ugly as f...

1 Attachment

That Rotor thing is interesting. I got a set off eBay for £15 or something because the NDS arm was fucked. I think if you remove the bolt entirely, it fucks up the whole thing? Strips the thread in some way? I looked into repairing it, but in the end I just kept an eye on eBay until an NDS crank came up for £30-odd.

I think if you remove the bolt entirely, it fucks up the whole thing

Exactly.

Thread hijack! I'd happily take those levers if you want rid of them. If you cba to post them to Sweden that is 😁

What about flipping it? too much drop maybe

I'll flip it for final photos. And commutes could be done with negative stem, but I am just much more comfortable like this...

2 Attachments

First time I came across a Rotor I did the same thing (unwound it). Managed to get a refurbed one from the supplier before the customer knew. Although the refurbed one didn't have the Cervelo logo on it like his did. I don't think he noticed.

Looks pretty good in profile tbh. With deeper drops, mebbe.

I guess it is a func bike so it doesn't matter :)

I will use the bars from the rando I think. The are wider, deeper and have a bit of flare.

Such a cool commuter

Bar angle is off. Point the bar ends in the direction of the seat stay bridge. Yw:)

Agreed, but never really been a fan of that rule. Varies depending on how high your bars are and the size of your frame.

Id say flip stem (-10) and make top section of bars and hoods all flush in the same angle <3

I am changing the setup on the brown rando frame. It will be more of a porteur 1x10 when I am done. I am digging this bar stem combo.

2 Attachments

.

6 Attachments

Looks like you need a new project.

Love that rando frame

New disc rando comes back from paint on Wednesday :-)

Long headtube is long :)

I do my best

Where do you get your silver Cane Creek headsets from?

eBay

Tinkering

3 Attachments