-
• #1777
Made a light mount today.
https://www.lfgss.com/comments/15787104/ -
• #1778
Has anyone got a good hack/bodge for something to stop my water bottle spouts (is that the right word?) from getting covered in mud?
I’m thinking a lid off something else that happens to fit a water bottle perfectly etc
-
• #1779
Mudguards?
-
• #1780
camelbak dirt bottles are actually quite ok
-
• #1781
It’s not really a mudguard-appropriate bike, to be honest!
-
• #1782
Ah ok, with a little flippy top thing. I was hoping for something I could use with any bottle, but I may well have to try one of those. Bit bored of mouthfuls of grit. Although I had my bottle on my down tube, shoved right up underneath my frame bag this morning and it kept the worst off (usually have it on the seat tube if I have a frame bag on the bike)
-
• #1783
I had a bottle with a flippy covery thing, cost way too much. It lasted about a month before rolling off the station platform and under a train on a journey home one time.
Maybe consider making a little fairing? Plastic with a heat gun, mounts to bottle cage bolt, acts as a mini mudguard aero thingy?
-
• #1784
Ok, a well positioned Crud guard. Not mudguard appropriate, what is this mythical beast you speak of?
-
• #1785
Love that! I'm always on the lookout for similar when I need to lift the bike up.
-
• #1786
Just my gravel bike. The rides I’m doing these days are so muddy that guards aren’t really an option.
-
• #1787
Maybe some kind of small waterproof bag? Like mini roll top dry bags? Then you can close it up completely, and it’s not slow to open and remove.
-
• #1788
Or I could use a stem bag I guess.
On a related note - I want to be able to put my Kinto flask in a standard bottle holder so I’m going to get a cheap neoprene beer cooler thing and see if that holds it firm so it doesn’t rattle around.
-
• #1789
Just wipe it with your jersey before you drink?
S’wat I do on the mtb.
-
• #1790
Mindblown.gif
You know what? I’ve actually never thought to do that. Which is slightly worrying...
-
• #1791
stem bag also works well, yes
-
• #1792
It's winter - no bottle required.
or
I wipe mine with my glove then put my glove in the wash after. -
• #1793
I have one of these. Not too speny either.
-
• #1794
Which is just a re-branded Elite Fly MTB in case anyone wants one without the MTB branding.
-
• #1796
Still a little bit Russian-roulette-y if you've been riding on lanes covered in sheep shit/field runoff...
-
• #1797
from rat bike thread
-
• #1798
Mudguard or rear rack?
-
• #1799
Why not both?!
-
• #1800
Found on insta
1 Attachment
Yes. A Google Nest bell push is powered by a 24V transformer—the big TNC block in the middle. The funny dongle thing is connected to the bell push and the relay control.
The relay switches the 8V supply of the bell, which is provided by another transformer.
The whole mess is connected to the mains by a normal fused plug, with a circuit breaker in between. The DIN rail inside the box that all the bits are mounted on is connected to the earth.
I still need to make three holes in the box with glands to run the cables in, and then I can put the lid on.
But why though? UK powered doorbells are 8V as a rule, and Google require 16—24, which is why I needed to add the other transformer and the relay. You could always use a battery-powered doorbell, I suppose, but I don’t want to be changing batteries in my doorbell. I wanted a video bell to deter burglars from trying to crowbar my front door open again (0800 on a Sunday morning!). Presumed culprits have since been arrested & charged, as a result of a neighbour’s video footage.
In short I would not recommend buying a Google doorbell for use in the UK, but it was type II fun.
1 Attachment