Suggest a rim please

OK, am after a rim 700c 32 hole, in black, no braking surface required (rear on fixed) clincher, semi deep-V (not standard, not stupidly deep, somewhere in the middle). Nice and lightweight ideally.

Have been looking online and on eBay but can't find anything that fits the bill.

Any ideas?

Velocity.

A23
aerohead

Halo Aerotrack £32.99 in black, 27mm deep, no brake track, 435g claimed* weight.
http://www.billys.co.uk/english/group.php?prod=rmha-aerotrack

• Kinlin claim 445g for the XR-270 which is what the Halo is in other territories, and there's one listing on weightweenies at 451g.
  

Basically these in a clincher...

http://www.ebay.com/itm/CAMPAGNOLO-OMEGA-TUBULAR-RIM-SET-700c-32-HOLE-NEW-/300604243414?pt=Cycling_Parts_Accessories&hash=item45fd68bdd6#ht_500wt_689

^^ just ordered, thanks mdcc - you're a gent despite what everyone else says ;)

Blimey! The email order confirmation has come back from Billy's for a Halo Aerotrack in black and delivery date is start of Jan 2012?!! There must be something similar/the same available more easily?

You in London or Holland?

DP18 are 30mm.

They are cheap (£25 per pair if you don't mind blue)

They are heavy.

They don't break.

@hugo7 - London fella

@Stonehedge - must be black no braking surface and not heavy

Basically these in a clincher...

http://www.ebay.com/itm/CAMPAGNOLO-OMEGA-TUBULAR-RIM-SET-700c-32-HOLE-NEW-/300604243414?pt=Cycling_Parts_Accessories&hash=item45fd68bdd6#ht_500wt_689

These man, they are dope. And I may have a spare, just depends if I can bear to split them up..

I've got an unmachined black DP18. It weighs in at 590g if I remember correctly.

^ and the annoying this is that I need a machined one!

There must be something similar/the same available more easily?

Ask Tredz or activesport whether they have it in stock
http://www.tredz.co.uk/.Halo-Aerotrack-Rim_37080.htm

http://activesport.co.uk/shop/article_1112-004/Halo-Aerotrack-27mm,-Aero-27mm-deep-Rim.html

SJSC are saying 'due tomorrow', although that seems unlikely if Billy's doesn't have them, as Billy's is the shop front for Ison Distribution
http://www.sjscycles.co.uk/halo-halo-aero-track-700c-(622)-road-track-rim-prod20130/

"Suggest a rim please" - somebody else must be thinking what I'm thinking..?

Aye, that would be me.

Get BLB to order some velocity A23s or aeroheads. They can come in black with a nmsw and pretty much any drilling. Plus they're lowish profile, but with an aero profile.

Tbh they Might have what u want in stock.

Brick Lane Bikes?! Cough spit! Sorry but I've been there a couple of times and found the attitude obnoxious, maybe they've changed - I hope so for their sake and that of their customers'. I did eventually find this on the bay, which seemed like a top deal:

http://www.ebay.co.uk/itm/160665362981?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_2256wt_754

That's going to be £60 by the time Customs & Porcel Farce have had their respective slices.

^ I'm already on the case, no UK based sellers I could find and can't wait until January 2219 or whatever it was for Billy's.

what about the weinman pegasus? deeper than a dp18 but a bit lighter IIRC

The Pegasus is 42mm deep and weighs 750 grams.

The Campag rims are very nicely finished (kinda satin black), light and surprisingly stiff.

750g? I've got a pair of 50mm Alex R700 that weigh 700g.

I've never riden Pegasus before. They must be pretty sturdy!

I've got a pair of 50mm Alex R700

Where did you get them? I quite like the idea of using a pair of those to replace my Ellipse rims, but I've never found a retailer.

Varno laced a few up for Roger Hammond for some bike or other a while back and had a pair spare...not sure he has any left though. I've been looking for a retailer as I want to build a pair up for track use. Maybe a quick PM to Varno might help? Could well be his normal wholesaler that can get them...

I'm really pleased with them although I haven't really done enough miles on them to comment on durability yet.