Clearout Pannier bags. Touring forks & racks. MTB rims. BMX cruiser. 29er Wheelsetc.

The big things

Cheap as chips BMX cruiser. £80 photos this afternoon

Green 20.5"TT DK fury
Cane Creek Direct Curve Brake
New Profile Bottom Bracket
The rest of the kit is stock

Same as this but in green

Selling cheap as it's in need of a new headset and I'm wanting to keep the rather nice profile crank and ring, but otherwise dirtcheap Cruiser for someone.

29er Wheels built by All Terrain Cycles

Hope pro2 Gunsmoke Hub on Mavic A119 rim - Front.
Halo Spin Doctor Bolted Black Hub on Mavic A119 - Rear.

36h, DB spokes, velox Rim tape

£110 the pair, though would consider selling just the rear for £55

Good quality Oxford Panniers. Used once.


Inbuilt Waterproof covering for Really bad weather.


One small section of stitching is frayed on the back (not visible when attached to the bike, pictured here.

These cost me £45, yours for £20 SOLD!

BRAND NEW touring forks. 700c Mounts for lowloaders and dynamo mounts on the inside of the left forkleg. Uncut 225mm steerer. Small marks from me being clumsy.
£15

You can see the colour better in the photo below

Never been used shimano canti brake with pads, bolts and straddle cable. Unsure of what model it is. Sat in my bits box for ages.
£10

Shimano Deore Hub.
Surplus to requirements as all my MTB's are disc. Little sticky, needs a clean out and regrease, but otherwise perfect.
£free

Clamp-on Axiom Front Low-loading rack for bikes without eyelets. Marked.
(clamps not pictured)
£8

Butterfly bars. Modolo Yuma - the original and best. Marked.
£10

for the MTB people
Mavic X618 rim
Destickered 26" 32H
Brake-surface unused (always been ran with discs)
£10

From the top, left to right.

Set of Reelight Dynamo lights Singlespeed/hub gear version, 3 magnets
£6

Bar End shifter, missing expanding clamp
£2

Brandy spanking new MTB Chain tensioner (pulley slides horizontally, so can be used as singlespeed or 1x9 setup)
£5 SOLD!

Roadie Pedals - well used.
Look-style Shimano PD-1056
£5 SOLD!

Stems, middle one already taken by someone in Manchester, Top is 135mm, bottom is 115mm. for 1 1/8" steerers.
£Free

LONG bar-ends Scraped up
£Free

I can meet you with this stuff in Manchester or Edinburgh and I can post it for whatever it costs if needed.

dibs and pm please.

thanks,
Colin

Email at PablowoofAThotmailDOTcom

ill take the white pedals

Dibs on bmx pending pics and spec

dibs Set of Reelight Dynamo lights Singlespeed/hub gear version, 3 magnets please - pm to come now.

@glowbike and/or anyone else ... Do you know if i can easily deploy these to be used WITH eyelets & mid-blade lowrider bosses?

I'll dib them now pending further investigation.

Assuming it's standard height bosses, the actual clamp sits about 20mm lower than the lowrider bosses and the top of the rack fouls the bolt by about 5mm. If you take the bolt out of your fork it will work fine.

If you're feeling particularly clever (and have access to drills and a vice) it should be easy enough to build an adapter to fit the rack to the lowrider bosses themselves.

helpful?

Actually I'll take the panniers too, please.

Do you know if the free hub attaches to Halo Spin Doctor hub in the same way as a shimano freehub and therefor if it is interchangeable with a shimano freehub? (I am aware the current hub is compatible with shimano cassette).

yes, helpful, I think so. TBH I don't think I'll adapt these, but I'd like the bags please... posted to London... can paypal you when you've worked out postage cost?

Sorry skully, panniers now gone. PM me your address and I'll post out the Rack. Literally just enroute to the post office now.

Skully dude, I can get Ortliebs, p.m me.

Hey man, are you selling the brake levers in the pic with the fork and the brake too?

Do you know if the free hub attaches to Halo Spin Doctor hub in the same way as a shimano freehub and therefor if it is interchangeable with a shimano freehub? (I am aware the current hub is compatible with shimano cassette).

i.e is this fitting the same?

do you need a fixxer too tommy?

Hey Tommy, sorry for not getting back to you sooner, I skimmed over your post. Didn't know the answer, and then spoke to someone else and forgot.

I honestly don't know. A quick look at google suggests it probably isn't shimano spline freehub fitting. Anyway if you use shimano freehubs you lose the damn-gorgeous and notoriously loud click.

Regards

Does the bmx come with any cranks at all? I'd quite like to ride it home

Nope, no cranks at all. Hobby horses are the next big thing.

Thanks glow bike.

I'l grab it....hobby hipster....

I'll bring my cranks.... What bb is there atm?

Profile 19mm (USA). Just heading downstairs to give it a clean now. expect photos in half an hour.

I'll leave the bb in, I'm moving the crank arms and ring onto my mtb, so won't need it.

sorry glow, just to be clear - no ta on the racks, bargainous though they are, I'll wait for some bolt-on ones to turn up.

no worries skully.

Dibs on the Modolo bars, will PM details

Well, once i've been registered for 24hours...and assuming they are still going? You can email me on afrowheels@gmail.com