-
• #1852
Bollocks Luca! Where did it get stolen from?
Cam he didn't want the mudguards so they are yours if you want them.
-
• #1853
Parkus piece last night. Was locked up.
Pretty sure I saw it in the back of a chavs car with my friends bike that also was stolen. Please keep
An eye out -
• #1854
Collection in Hauxton preferred or possible Lunchtime meet in town!
http://s1083.photobucket.com/user/sswisscheese/library/Bike%20Bits
see pics for details, and in no particular order:
Club Roost I-beam stem for 1' threaded, 25.4 clamp - £4
Offroad/Girvin Flexstem for 1' threaded, 25.4 clamp, very early 90's, great condition - £4
Shimano Altus C 10 RD 7/8 speed working - £3
Shimano Deore FD MTB tripple 28.6 clamp from memory - Free
Shimano Acera brake levers - £3
shimano Acera X canti brakes, straddle wires, new blocks - £5
Marin 6061 Black Riser bars for 25.4 clamp - £3
Azonic Chubby Bars and Azonic Hammer 1'1/8 (legendary combo this, odd size 26.8 clamp from memory; so as a pair) - £15
Wellgo B-47 platforms, wear with soft soles coz these will rip your shins off, hardly used - £8
Finger Brake (Left) - C-star branded - Free
Retro Chrome Drop Bars, Hipster Narrow ;) , I was gonna chop and flop these - One Beer
also got a few other bits to sort pics for.
PM me is anything floats your boat!
Thanks for looking
Cheers
sswiss -
• #1855
campagnolo mirage chainset £20....(surplus as i've just bought campag chorus carbon square taper).
uses 111mm axle.
172.5 cranks, 53x39 rings - the inner is a little worn but useable.
early 8 speed, 1 owner from new ;o)
3 Attachments
-
• #1856
anyine got any campagnolo bottom bracket tools i could borrow?
-
• #1857
how customisable are fixies? always ridden mountain bikes and have to check out a fixie eventually
-
• #1858
how customisable are fixies? always ridden mountain bikes and have to check out a fixie eventually
as much as you want.........
-
• #1859
Few bits:
Kali Amara MTB Helmet. Used but good condition, never crashed. Size M/L
SOLDBontrager Saddle like new (ridden a few km)
SOLDSDG Bel Air I beam (used) 186gr ! £10
http://imgur.com/YxO3L0P
http://imgur.com/5Dy4ZQZ
http://imgur.com/365xtIF
http://imgur.com/JNqme6FAny question PM me.
Collection available at the train station weekdays daytime.
Max -
• #1860
campagnolo mirage chainset £20....(surplus as i've just bought campag chorus carbon square taper).
Uses 111mm axle.
172.5 cranks, 53x39 rings - the inner is a little worn but useable.
Early 8 speed, 1 owner from new ;o)sold
-
• #1861
By any chance does anyone have a 26.4 inline seatpost?
-
• #1862
Few bits: Royal Nuevo (NJS), Campag, ITM, System Ex...
Few bits for sale, pics to follow tomorrow as I'm on infant duty tonight and unlikely to get a chance (and/or lazy)...
Pedals
MKS Royal Nuevo + Clips (L) and BLB single straps
Posh beater condition as-is, but will easily clean up to 'posh-ish'. Priceless NJS stamps on both metal bits, cheap BLB stamp on the leather. I say priceless, in this instance we're looking at £75 for the lot.Campagnolo Athena pedals with original cages and single straps
All original and lovely (if a little grubby) condition. Again, will clean up lovely, but I'm not using them, so I haven't bothered... Clips are adjustable and straps are original(!) too. Lovely things, which I think are worth 50 of somebody's pounds.Cockpit
System Ex track drops
Good condition, one side wrapped in cloth tape, the other isn't. If that's useful to know... £15.Titanium ITM stem
130mm - truly lovely thing. Mint condition and, accordingly, worth £20 IMO.There's probably more I'm forgetting about as well, in which case I'll add it to the thread later!
Collection on Mill Road, or can potentially deliver, within reason.
Finally, thinking about parting with the lo pro. For sellz will be frame, forks and front + rear wheels. White Industries eccentric hub means you can fixie the shit out of the vertical dropouts and the front wheel will do plenty more miles before it needs replacing. I'll chuck in the tyres too - almost brand new Zaffiros with lots of tread.
WI hub alone is easily worth £100+ and the frame is a custom 653 fillet brazed masterpiece, so I'm thinking £400 for the lot (which I'd like to sell together) but we can discuss splitting, should you only want certain bits...
F&F measure up as 56c-c, 60 c-t, top tube 56 c-c (effective), but I'm 6 ft and they're a good fit for me. Probably equivalent to a 56-57cm, but you never can tell with a lo pro!
And now for the bad bits... I've ridden this bike HARD through two winters and the paint shows the usual chips and there are a couple of spots of rust to the chrome, but it polishes up VERY NICELY and the colour makes up for a lot when seen in the flesh. I can clean it up before sale, but it's currently my daily ride, so will need some notice in order to strip down for sale. The ST has been repaired at the seat clamp at some point, which isn't cosmetically great (rusty!) but it's structurally sound. See below for the obligatory picture.
-
• #1863
Have now acquired a new bike and will be swapping around a few parts, therefore making this available (soon) as a FULL BIKE.
Price will go up somewhat, but probably up to £100 more, dependent on whether you want pedals or not.
I'll post some pics of the new incarnation ASAP, but drop me a PM if you're interested to discuss...
-
• #1864
dibs saddle!!!
-
• #1865
Full bike spec will look something like...
Dave Lloyd custom 653 lo pro (56c-c, 60 c-t, top tube 56 c-c (effective))
Tiagra front brake w/finger lever
Essentially new 700 + 650c Vittoria Zaffiros
White Industries eccentric hub laced to Mavic CXP 33 rim
System Ex hub to Mavic 'something' 650c rim (24 spoke radness)
New 106mm cartridge BB
Sugino RD2 cranks w/46T chainring
16t sprocket and Dura Ace lockring
Campy record copy seat post OR generic black post
Flite Ti (one of two - both have years left in them, just depends which one I keep aesthetically!)
Unknown headset - perfectly serviceable
Bars will probably be risers
Pedals can either be Shimano SPDs, MKS Royal Nuevo (NJS) w/cages or Campy Athena w/original cages or NONE!Will hopefull get a chance to build/dismantle/rebuild this weekend, so should be available some time next week.
Ideally want to avoid splitting at this stage, but give it a couple of weeks and we can talk!
Looking for about £500 with pedals, £475 with SPDs or £450 with neither.
-
• #1866
Does anyone have a 110m - 120mm, 31.8 stem they wouldn't mind loaning me for a day? I'm thinking my current stem is a bit too short but I'm not 100% on which length I should be aiming for, don't want to spunk cash on something I won't end up using.
-
• #1867
I do.
PM Me
-
• #1868
I need a rear brake calliper and a RH lever for a my SS beater. Anyone got anything to sell?
-
• #1869
Don't suppose anyone has something with gears in about 54cm for a reasonable price, do they?
Looking for something for the wife and her current 56cm frame is a touch too big...
-
• #1870
Does anyone have any beater wheels lying around?
Need to be Singlespeed or flip flop. Cheers
-
• #1871
Try Here First
For Sale: Shimano 105 5600 10 speed Chainset
53/39 chainrings, 175mm arm lengthVery Very Good Condition, plenty of life in the rings, i'd be using these but 175 is too long for me. Please check out the pics and pm any questions.
Asking just £37.50 collected or drop off depending on location. Sold Elsewhere!
http://s1083.photobucket.com/user/sswisscheese/library/Shimano%20105%205600%20crankset
trades considered for good quality road saddle or seat post 27.2
-
• #1872
Couple of things need to go;
San Marco Concor Light (Black w/Titanox rails) - £40
Used this for one 60 mile ride and prefer my other saddle so this is mint and comes with box if that's your thing. Good looking saddle and pretty light (208/16g quoted from wiggle)Nitto RB021's (Black, 38 Width, 26 Clamp) - £30
These are well used as you can see from the tatty (but functional) bar tape. There's a chip in the paint caused by a shim in the middle and possibly a scratch where the bars have caught a wall though as far as I can tell the tape protected them. If these are going on a Sunday best you may want to re-tape/plug them.Images -> http://imgur.com/a/0ilS2#5
Too many birthdays in April and I'm feeling the pinch on my pocket. Need some cash for a trip next week. £32 on the Saddle, £25 on the bars and I've also got an iPhone 4 - 16gb in black for sale with charger (cable a bit grubby) for £100 In really good nick as well.
-
• #1873
As a follow up to this: http://www.lfgss.com/thread123575.html
I have a free cycle of a few of the surviving bits: http://www.lfgss.com/thread125523.html
-
• #1874
Alc - ygm
-
• #1875
For some reason I seem to like collecting pursuit/bullhorn bars and currently have more than I have bikes, so I'd like to get rid of:
- Profile T2 Wing bars, 42cm c-c, 31.8 clamp £15?
- Deda CronoNero Low Rider bars, 44cm c-c, 31.8 clamp FOR GIANTS £12?
-135mm 31.8 clamp stem of great generic-ness £free
-RH Shimano hooded brake lever £free
Also got one of [these] chain tensioners which someone is very welcome to for a fiver.
Photos of bars and chain tensioner thing:
Ooo what nice bars #1
Profile bars
Low riders
Chain tensioner - Profile T2 Wing bars, 42cm c-c, 31.8 clamp £15?
Shit luck. Did you buy those mudguards from Josh?