Dolan Pre Cursa / PreCursa / Track Champion

https://i.cloudup.com/nX0H4btZC8.jpg

Yesterday bought another Track Champion for me. This time a 56 instead of 58 and it will be my 2nd bike.

^sizing down, doin' it right.

So yeah, will go the PC route for racing. Am 6ft2", should I get a 58?

So yeah, will go the PC route for racing. Am 6ft2", should I get a 58?

The 58 vs. 60 is a 35mm longer top tube on the 60 - so you are basically choosing between long stem vs. shorter stem when choosing between those two frame sizes.

The 56 and the 58 is basically the same numbers where it matters - except for the head tube - therefore I would only go 56 if you are planning for TT events compatibility or you are very flexible your height taken in to account.

PC sizing is very funky. ^ this helps.

I was freaked out at how low the 56 was at the front. Fairly long too.

Does a Stronglight 2000 crank with a 48t chainring fit on the Pre Cursa or should i get a smaller chainring?

Depends what bb you get.

a 107mm

Does a Stronglight 2000 crank with a 48t chainring fit on the Pre Cursa or should i get a smaller chainring?

Yes according to earlier in this thread http://www.lfgss.com/thread15753-33.html#post4007975

alright thanks.

Mine when in street mode. Non driveside photo i know, but be kind cause i spent several minutes searching it since i posted it on another forum long time ago.

If anyone asks, the thing attached to top tube is steel bar i bought to repair other bikes fender. Photo was taken when coming back from hardware store.

a 107mm

i think 110 is the way to go as far as i remember

^107mm bb, 2000s and a 48t stronglight fitted my 58cm perfectly.

The 58 vs. 60 is a 35mm longer top tube on the 60 - so you are basically choosing between long stem vs. shorter stem when choosing between those two frame sizes.

The 56 and the 58 is basically the same numbers where it matters - except for the head tube - therefore I would only go 56 if you are planning for TT events compatibility or you are very flexible your height taken in to account.

58 it is then, cheers!

adjust some angles on my pc the other day

There's always 'slight adjustments' if you own a precursa...

107 didn't fit on my 60cm PC. Needed a 1.5mm spacer on driveside. I'd recommend the 110mm BB.

I've ordered the 52cm frame.....and i am going to try it with my 107mm bb but also ordered a 110mm bb just to be sure

Looking at a PC frame on ebay - does the welding on the seatstay dropout look normal here? Or could it have been rewelded?

http://i.ebayimg.com/t/Track-Fixed-Gear-Fixie-Dolan-Pre-Cursa-Frame-/00/s/MTIwMFgxNjAw/z/5XkAAOxy3yNTeljl/$_57.JPG

Looks like normal wear and then maybe a little cover up with black permanent marker.

OK, thanks

http://happypics.zapto.org/albums/userpics/10084/normal_bild_2-2.JPG

Is the top cap And star nut included with the Dolan headset?

I don't know for sure but usually the star nut is not included. The top cap is however.