Birmingham Trades & Sales

I did, but I had to remind you about three times, and one barrel adjuster isn't much use on a double lever conversion kit.

Basically, you're paying the price for your own tardiness.

Yep, my windsurf club has loads. If we go for a sesh next week you could come down to the reservoir and choose a pair. Check the facebook page here to see if we're going http://www.facebook.com/groups/buwc2011/

awesome stu! we need 'em for a few days if that's cool?

selling my selle titanium flite
seen better days
£17

3 Attachments

awesome stu! we need 'em for a few days if that's cool?

No worries, the club is going en mass to the national champs on 20-22 April so as long as you can get them back before then I doubt we would misss them.

Another reason to get into windsurfing - if you show unbelievable tekkers they give you beer!

I did, but I had to remind you about three times, and one barrel adjuster isn't much use on a double lever conversion kit.

Basically, you're paying the price for your own tardiness.

Undibs now, i've finally rigged up my own version:

/attachments/51573

1 Attachment

very neat, i like it

Looks like you have a bmx/short pull lever setup with a V brake there. Does it work ok?

I have a couple of them gyro cables if anyone wants one.

seems to at the moment......

that's actually a well good idea neil, haha

good work neil

Does anyone have a tatty 700c front wheel for sale or trade?

budget? rim width preference? is it for polo or riding?

i'm after something budget, not really bothered about rim width as I'll have to buy a tyre to fit unless it comes with one. It's going on a bike that I will be riding daily

Got a mavic ma2. Built up by me, with shiny new DT swiss spokes on a nice miche hub. Only problem is that there is a bit of a dent in the rim this was there before I rebuilt it and I did a good job of straightening it out. But you can still see some marks on the rim if you look carefully.

Would want £22 for it. Spokes were expensive. For £27 you'll get a very lightly used 23c conti ultrasport tyre. For £30 you'll get tyre & skewer.

hmmm, maybe. Anything you need? I've got lots of stuff to trade

I need a 115mm italian threaded shimano BB.

A pair of rim tapes that would work on 650c (so either a 26" tape or cloth tape)

Maybe a 27.2 seatpost that has some decent length on it.

Sorry, I don't have any of that. I have a friend who might be interested in the wheel, I'll let you know

Wanted: silver low rise riser bars, 25.4 clamp. Non-v brake levers for said bars, pref. silver.

For sale:

SR Suntour 175mm cranks - used £5

Forged 170mm light cranks - used with foot rub £3

SR Custom (made in Japan) Non drive side 170mm crank arm - Used but very good condition £3

Wellgo flat pedals (DMR copies) - Well worn but life left in them. £3

Green Cre8 plastic flat pedals - light use £3

Black flat pedals - well worn £3

Shimano Sealed cartridge bottom bracket. 68 (standard) fitting 113mm with bolts - very light use £8

Tange Sealed cartridge bottom bracket. 68 (standard) fitting 118mm - used £5

Disk brake calliper - Used £4

Shimano V-brake levers (pair) - light use £10

Long Adjustable Stem (0-60 degrees) - used but good condition £7

Shimano V-brake callipers (one set) - Good condition (need a clean) £8

Dibs first then PM. Collect from Hall Green or can deliver in South Birmingham.

Wanted: silver low rise riser bars, 25.4 clamp. Non-v brake levers for said bars, pref. silver.

I have both. 50 dorra?

Shit barry, silver coloured not made of silver!

WANTED:

700c front wheel x2 - 1x good condition 1x ratz condition

WANTED:

700c front wheel x2 - 1x good condition 1x ratz condition

i got a ratz condition one its a quick release, black rim maybe radial laced unsure willhave to check, 7 pound?

I've got an ex-polo rat wheel you can have gratis. Might (will) need trueing.

Shit barry, silver coloured not made of silver!

Na I was messing, 10 dorra? comes with sexy purple grips