Northwest Marketplace

Posted on
Page
of 277
  • rhb doesn't play polo, but is a local with lots of bike bits. I've got a 34t single but it's ISIS so you'll need a new bb, which you need anyway.

  • rhb doesn't play polo

    yet.

    that needs fixing.

  • ok. so how can we work to have a look to it? How much would be for the truvativ?

    I remember you had but by the moment the bb is working fine. It isn't getting worst so I will keep with the same bb until it will be definitively broke.

  • this could be pretty good with a 38t, look a bit crappy but I'm sure they were selling the same things in wills wheels on the A6 for a fair bit more money. GI would be 44.5 which is damn close to mine depending on tyre size.

    Look nice as well. A 33 can be good. It's a pity that it cost the half of my bike! jaja

  • Salman, I've dibbsed https://www.lfgss.com/thread83649.html#post2815012 this freewheel in case you want it.

  • The ACS ones are meant to be OK.

  • Nice one Rob! I'll have that since you dibbsed.

    For future reference, Keep Pedalling (and I'm sure other bike shops) can bring BLB stuff so you don't have to pay ~£20 for shipping. TIL.

  • Nice to know.
    I'll pm the dude and tell him you want it, then you pm him, then I'll pm you and then we all pm chan. That'll be easiest.

  • ok. so how can we work to have a look to it? How much would be for the truvativ?

    I could pop by polo, however not tomorrow as I'm busy.

    Where do you live / work? I'm all over the place so might be able to drop by sometime.

    Not sure what the going rate is for 2nd hand chainsets, but I think £10 is a reasonable price?

  • yet.

    that needs fixing.

    tried it in the mids, was fun, not something I have time for tho

  • I live in Fallowfield in front of Mac donals and I'm there most of the day. It seems to be a good price.
    I'm not hurry so if you prefer to bring it to polo other day it's ok as well.
    Can I see a photo first to avoid the trip in case I don't want it?

  • yeah, i'll post a picture later

  • Picture:

    /attachments/52123

    They need a bit of a clean up.

    P.s. They retailed at £29.99 when they were available, so tenner for these seems reasonable.


    1 Attachment

    • IMAG0989.jpg
  • cheers rob!

  • You sort it?

  • well, i pm'd. wanna pm chan now?

  • We need to get the other guy to as well, or the whole thing will fall apart.

  • I have just bought this frame in the garish green! (size medium)
    http://www.on-one.co.uk/i/q/FROOP/on_one_pompino_frame
    and these forks in white,
    http://www.on-one.co.uk/i/q/FOOOP/on_one_pompino_fork


    I pretty much am after everything else to make a polo bike. So if anyone can help me out with any of the following or give me advice that would be ace :)

    Wheels, 700c
    Headset, 1 1/8 inch
    Bottom bracket, 68 shell
    Crankset & bashguard, mountain bike
    Freewheel, matching the size of chainring
    Stem, 60-80
    Bars, flat
    Grips
    Pedals, plastic bmx
    Seat post
    Seat clamp
    Brake lever & caliper
    Brake cable
    Chain, singlespeed 1/8th
    Saddle

    Also if I have forgotten anything can you let me know, Thank you!

  • Picture:

    /attachments/52123

    They need a bit of a clean up.

    P.s. They retailed at £29.99 when they were available, so tenner for these seems reasonable.

    It look that that cranks are stronger than the ebay ones. I also like that would be able to take out the big chairing.

    32/22 in my bike sounds good. If it's also strong I'll have to try 22/16 and see what happend!

    I'll take it. How can we meet?

  • I'm after a cheap and cheerful bike or frame, needs to be on the small side 50-54cm, condition isnt too much of an issue, as long as the frame isn't bent, and its cheap!

    If anyone has anything give me a shout :)

  • I've got an old 70s road bike in the basement I've been meaning to sort out for a while, it just about runs but needs a bit of tlc, was thinking of converting it to singlespeed and selling it, it's pretty small but I've never measured it. Can do so if you want, it's a coventry eagle and is some sort of reynolds tubing.

  • @rob sell it to him, but just before he picks it up convert it to a polo bike. score 1 more player!

  • It look that that cranks are stronger than the ebay ones. I also like that would be able to take out the big chairing.

    32/22 in my bike sounds good. If it's also strong I'll have to try 22/16 and see what happend!

    I'll take it. How can we meet?

    I'll bring them to you sometime next week. Will send you my number, easier to sort by phone.

  • my flatmate is looking for a second hand bike. does anyone have one that want to sell?

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

Northwest Marketplace

Posted by Avatar for Dr_Chan @Dr_Chan

Actions