Northwest Marketplace

Posted on
Page
of 277
  • PM sent and dibs marked on the ad.

  • for polo...? got a few pairs knocking around, what sort of width/rise you after..?

    Well I wasn't looking for polo bars actually... I was after 35-38mm risers or straights in a fairly good state for a 25.4mm clamp or I'm contemplating buying a set of nitto drop bullhorns as they look pretty sweet

  • **FS:
    **
    Beater wheelset, bought from Kompute before Christmas for a project that didn't come together. Joytech hubs, unknown rims, the cog, lockring, freewheel, tyres all included. Would like what I paid for them £35

    Charge bullhorns, a couple of scratches and charge logo has worn off a bit, think they're 42cm wide, 25.4mm clamp - £10 - Earwig has dibs

    Marathon Plus tyre, 26x1.75 wired, heavy, pretty much bullet proof. Ridden for about 50 miles.** £10**

  • Someone mentioned having elbow/forearm pads for sale...

  • Items collected by snottyotter.

  • I'll have a look at them when I pop round, might be useful as a polo spare for someone

  • Rob can you grab me the rack, if its no good for what i want i will re-donate....

  • oh, and i think i've got a new set of lock nuts somewhere if you take the wheel.....

  • sweet, I'll grab the rack for you, then you can grab the rack off me, we'll both grab the rack

  • and then I'll grab your nuts

  • **FS:
    **
    Charge bullhorns, a couple of scratches and charge logo has worn off a bit, think they're 42cm wide, 25.4mm clamp - £10

    [URL="http://www.flickr.com/photos/andrewkirsfelds/6868281951/"][/URL]

    Can I get provisional dibs on these? PM coming in a second

  • and then I'll grab your nuts

    Is there no stopping you? You've only just had two good quality tugs from me!

    I'll try and get down to polo on Thursday so if anybody wants a look at those levers or shifters I should be able to bring them down.

  • Recruited another one!

    Adam, I'll bring the rack that I grabbed so you can grab the rack on thursday

  • selling this super cool deep section 700c rear wheel double fixed hub,
    Looks like a H+son but is actually off a giant bowery, totally straight, light, sealed hub, has a braking surface if required but never had a brake on it looking for £40 ONO includes gator skin tyre

    this still for sale, anyone?

  • you're selling it, you should really know if it's for sale

  • Funding an arrospok?

  • realised I want profile airwing bars (26mm) rather than pursuit bars... anyone got any to sell?

  • this still for sale, anyone?

    You including cog and lockring as pictured? take 35?

  • This is a fresh advert for the items I put up a couple of days ago along with some new items my brother wants to get rid off. If you want a better look at any item there are some hi-res pictures on the link below:

    https://picasaweb.google.com/107776310854563975832/February122012
    **
    Tektro RL720 brake lever RIGHT HAND ONLY (Calliper / Canti 24mm Clamp)** - £3
    As fitted on my Charge Plug when I bought it. Open clamp design so really handy if you're one of those people who likes changing bars or only runs brakes some of the time. Very good condition.

    Charge Stem 110mm ~5deg, 1/8th steer, 26mm clamp - £3.50 - DIBS by Earwig (Collect@polo)

    **Shimano SL-R440 (Tiagra Flat Bar) 9x3 speed pod shifters - £12

    ** Originally fitted on my Sirus Elite then moved to my brothers bike for the last few months. Still work flawlessly and in good condition, just a few light scuffs. The shift indicator windows can be removed although there are no blanking plates.

    On-one Midge bars (25.4mm clamp) - £10

    Don't worry about the scuffs, the bars were rubbed down with sandpaper by the original owner to get his tape to stick better. The exposed bit of the bars is mint. These really haven't seen much use as my landlord ran them for a month before selling to my brother who ran them for two months before going flat bar.

    Shimano FD-R459 Front Mech - £3

    Tiagra spec mech with 31.8mm clamp (standard nowadays, the shims for other sizes can be had for a couple of quid). Originally supplied on my old Sirus Elite it's bottom pull with an upper tooth limit of 50. I ran it with 28,38,48.

    Generic V brake levers - £2.50

    50mm 45deg Stem. (11/8th / 25.4 clamp) - £2.50

    Was used for about two months with the Midge bars. Not a mark on it.

    The items are all available for collection / inspection at my house in Levenshulme. I'm about 2 minutes walk from the train station and about the same by bike from the Fallowfield loop. I'm not working at the moment so can be free pretty much any time if you want to call in and have a look. Just drop me a PM or give me a call on:

    Ohhh seven five 39 two 8 six ohhh double7

  • You including cog and lockring as pictured? take 35?

    including lockring and cog, no less than £40 though

  • Can i take the Canti Hanger please and if Rob hasn't popped by for the wheel and rack can you give it to him.....? if not i'll drop you a text and collect

  • he might be popping up to check out polo tomorrow (snagged another one), I've already grabbed your rack and will bring it with me

  • Can i take the Canti Hanger please and if Rob hasn't popped by for the wheel and rack can you give it to him.....? if not i'll drop you a text and collect

    Yup, no probs. I'll bring it on Thursday night. I'm already down to drop of the charge stem for Will.

  • Oh, and if anybody fancies just the left hand side Tektro lever then let me know, somebody wants the right hand side one but I'm reluctant to split them unless I can get rid of both of them.

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

Northwest Marketplace

Posted by Avatar for Dr_Chan @Dr_Chan

Actions