I want, you got?

Posted on
Page
of 3
Prev
/ 3
Next
  • ah, me bad, sorry multitasking. not the strength of a man.

  • Heh heh..... no i was being thick! Anyway, so you've got a front one spare yeah? Their were loads of really lurrrvely ones down at condor yesterday in the sale mega cheap, the campag black veloce, but the skeleton ones.. hubba hubba... unfortunately only the rear ones :(

    What ya want for it?

  • sorry i took so long to answer guys, i'm after the fat one 31.8 as i got my new bars this morning and i would preferably like the lift one

    @ sol - sorry
    @ TobyOne - i thought that the kore ones are cheap looking and covered in graphics and expensive. And the specialized ones aren't that common, unless you meant that specialized was common.

    So if anyone wants a right handed brake lever for 31.8 bars let me know

    also Ma3k had a lever a while back he might still have it, where are you???

  • Toby the caliper is already gone i think , sorry mate

    We could however chip in for those ones still, but smaller than flickwg's:
    http://cyclestore.co.uk/productDetails.asp?productID=9252
    not sure about the clamp size - we both have 26 mm bars, 23 might be too small
    Do you want me to give you a shout when i find a good one in black ?
    I would need left btw

  • @ flickwg - Yeah sorry i meant specialized as a brand, nothing personal :) i had a allez for years! Also sorry again, i should have asked what size you were after beforehand!
    @ sol - Thats good as i'm after the right hand one, i'm not keen on the specialized ones, i would rather the cane creek, i'm gonna see if i can get the cane creek ones below a tenner ok (inc postage)?

  • @Toby One - don't worry, i know what you mean about specialized, but they're apparently quite good the levers

  • yeah they are, my mates got a tricross which has these, i took it out for a weekend burn around the downs and they were suprisingly good!

  • Toby, let me know what you find, i will do the same and then we can decide if we like them

  • No worries, will do, i'm watching the cane creeks, they end in six hours so fingers crossed they stay cheap!

  • sorry Toby, its been swooped upon and taken already. i might have a spare black right tektro lever, cos I want a gold one.

  • Balls! Oh well... better be quicker next time ay!

    Still after a black crank, miche or similar? And a front brake too :)

    Anyone....

    Black crank (with or without ring)
    Sproket - not bothered on size at the mo, just wanna get rolling
    Black stem - needs to fit 40mm bulls and the fork is a 1-1/8, needs a good angle Thanks to RPM
    Carbon spacers
    Black Front brake

  • Sorry sol, they went over my max of 13.50! Should have bid a little more.... will keep looking ok?

  • no worries, we'll get them some other place

  • Just bumping this up a little.... i still need the following for two projects currently on the go :)

    1- Black track crank
    2- Gold chain (and i don't mean the one the chavs wear! ;) )
    3- Rear fixed sprocket 18t
    4- Rear freewheeling Sprocket 18t (yeah yeah.. i know ;) )
    5- Pair of Cane Creek (or similar) cyclo cross levers (Sol wants the left handside one, i need the right)

    And then for the other winter beater -

    1- set of cheapo 700 wheels (nothing special at all, as long as they are straight and go round and round :) )
    2- basic track crank

    Sooooo.... if you have any of the above please please either email or whisper me :D

    Tanks!

  • Does it have to be a 'track' crank for the beater? Could use an old road double.. which I've got.

  • you have a road double hipster? - does he do the miles while you eat the cake....

  • big daddy wayne you have a road double hipster? - does he do the miles while you eat the cake....

    Ha!

  • dogsballs [quote]big daddy wayne you have a road double hipster? - does he do the miles while you eat the cake....

    Ha![/quote]

    hits end of joke drum! :)

    Hmmmmmm.... possibly, but would look a bit weird, anyway of getting the other ring off?

  • just use single bolts ;) , as i said i've got a crappy looking campag double that you can have for free (bit corruded but purely cosmetic).

  • Take dogsballs, I want money for mine (purely to recover costs)

    wayne: shaddup! My grump level and leg pain is telling me I'm doing the miles!
    (I have a coach on board now too and some info for you from a guy who's done l2p :P)

  • Tanks velly much, How many toof you got?

    Can I relieve it from your your palms? pnar pnar!

  • me, 39 and 52T

  • dogsballs me, 39 and 52T

    What rear sprocket would i use with that? Lower than 18t i presume? But yep, defo up for taking it off yer hands as need to get at least one bike out of the spare toilet and made usable! You sure you don't want gn's for it?

  • TobyOne -BoBoB- [quote]dogsballs me, 39 and 52T

    What rear sprocket would i use with that? Lower than 18t i presume? But yep, defo up for taking it off yer hands as need to get at least one bike out of the spare toilet and made usable! You sure you don't want gn's for it?[/quote]
    depends on which you use. 39T maybe a 15T or 16T, 52T probably 19T. you can make a donation if you wish, you need to get some single chainring bolts though.

  • OKaly dokaly.... Its a deal, a steal etc etc

    Donation? Kidneys, liver, maybe a lung perhaps, all part abused of course! ;)

    Where do i need to go to to find you? Kings cross, on the corner?

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

I want, you got?

Posted by Avatar for BoBoB @BoBoB

Actions