Tool library / tool exchange. Post what you got and where you are

Top man, not far from me.. Pm'd

And another thing:

Anyone got a two notch 'regina GS' freewheel remover?

Got some nice hubs if I can work out how to get the little fucker off..

Anyone SW2 way got a pipe wrench or large adjustable to take off a BB cup. Can't find my one and cranks off kinda lame.

Matt u can use hammer and big nail. its work too.

Matt u can use hammer and big nail. its work too.

Nah there is no holes or anything on it or I would. Going to abandon the plan to change it to a cartridge and buy some new bearings tomorrow then service it from the open non-drive side.

Nah there is no holes or anything on it or I would. Going to abandon the plan to change it to a cartridge and buy some new bearings tomorrow then service it from the open non-drive side.

I mean Mrgumby

I'd try a 2pin tool if I didn't have the slotted socket thing for it, not as thugish as a hammer but really handy for almost anything that needs to be unscrewed have done this on single speed freewheels with 2 or 4 splined things.

Ive got one of these in the shed ill give it a go..

otherwise its off to ebay and a £26 tool that I'm only gonna use once in my life..

http://www.ebay.co.uk/itm/310824994412?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Thanks guys

I made a tool ages ago for a freewheel like that. You're welcome to try it, I'm by Broadway Market, E8.

Ordered a pipe cutter 3-35mm so can do bars and steerer tubes with it, was only a few quid so figured it would be one of those things I need randomly and can't find but happy to lend out.

Anyone on here got a headset press? Have 3 bikes that need new headsets put in...

I have one in SE16

Anyone have a Shimano cassette removal tool I can borrow for a week or so please? Preferably someone SE or central. They're the same for 10 & 11 speed, right?

yes, if you can get to e2. may be in new cross monday. i believe so, 11 use a diff lockring but teh face is the same.

Mat you can grab one off me if you need. Usual place and number.

Anyone have one of these? Preferably in the south.

I've got one of those..

But I prefer to use this:

You welcome to borrow either. I'm in Camden, gospel oak.

Matt

Hi!

Anyone have this tool that I can borrow?

Shimano TL-FD68 Cable Fixing Point Checking Tool

Thanks :)

1 Attachment

I do, I'm in Bucks

Almost done rebuilding my bike. Anyone near Blackheath SE3 got a torque wrench I could use for all the bolts n stuff? Cheers

I gots one in SE13...

PMing

Has anyone got a Sachs Malliard freewheel removal tool I can borrow...?

Has anybody got a dremel or similar I can use to cut a slot in the heel pads on my Sidis please? Two min job so won't even need to take it away.

In SE13 but work central and happy to travel.

Dremel-a-like in SE7 if that's any use to you