Wheelbuilding / Wheel Building / Wheel build help

A mate of mine has bought a CannondaleX SE with an offset hub position. Apparently he wheel need to re-dish any new wheels he gets by 6mm to cater for off set.

Does anyone know process for this and anyone that could do it?

Thanks

Psr xtra 1422

That’s what I figured. Thank you.

Which rim did you decide on?
I found a set of immaculate DT Hügi 28h hubs locally but still need to get a SP PV-8.
Spokes will be Sapim race/force and brass nips.

Due to lower spoke count I was leaning towards the XR26t, the XR31t are a bit too high for light touring/commuting.

XR31t are a bit too high for light touring/commuting

?

Recommendations for a lightweight gravel rim? 650b, disc, and preferably matt. Rider is 60kg. Will be built 32 spokes, because that's the hubs I have.

Was thinking of trying some Stans Crest, but they look quite shiny.

I've been running these in 700c for a couple of years.
https://www.dtswiss.com/en/products/rims/mtb/cross-country/xr-361
The finish is sort of matt/textured.

I’ve been searching for a wide, deep, tubeless ready, asymmetric, silver, 36h rim but cannot find.

Does Kinlin XR-31RT exist in silver 36h or similar spec / price?

WTB i23, sometimes pop up on planet x for cheaps. I paid 30 quid for a pair

I’ll keep an eye out for those I should have also said 700c with rim brakes.

I think the Ambrosio P20 comes close to what you're after, albeit not asymmetric.

Ok, you got me I don't really like the look of them on this build.

My reply wasnt to you. Im not sure what youre looking for exists

Thanks for the suggestions everyone. Think I'll go with the DT XR361...

https://www.huntbikewheels.com/products/hunt-sprint-aero-wide-road-wheelset-1497g-31deep-24wide?utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&gclid=CjwKCAjwi_b3BRAGEiwAemPNU2mElKV9uBe6CpmCK8DLzoqhFFMZ8uCPwil7GtY1P72HX-OtCAANAxoCg30QAvD_BwE

If I wanted a pair of rims similar to these, what should I be looking for?

https://kinlin.com.tw/xr-31t/

Thanks

XR31T is always the answer.

On the race aero wheelset at least, the rim is an XR-31, not just similar

1 Attachment

A mate of mine has bought a CannondaleX SE with an offset hub position. Apparently he wheel need to re-dish any new wheels he gets by 6mm to cater for off set.

Does anyone know process for this and anyone that could do it?

Unless you're really lucky with spoke lengths, it'll need a fresh build with the correct lengths. Anyone who can build a wheel can build an offset wheel, especially if it's only 6mm, not 28mm like some fatbikes.

Thanks!

I'm thinking it's especially the answer for a classy as tarck wheelset

Velocity A23oc is all those things except deep.

If you find a black version of what you want, get it stripped & polished.

Either of these options is expensive.

my rims keep filling up with water and it sloshes around for days if i don't take the tyres off to let it out; i need to drill a small hole in each; any tips?

The lowest point is always in the tyre.