The 'Let's Trade' discussion

Mr Bungle [quote]hippy It was removed before I proceeded to crash with the brand new alu steerer fork in.. the day after! Fsck!
Still, can't vouch for its history although the bike when I bought it was barely used and it didn't snap during the couple of weeks I rode it. :)
They're kinda like these without the mudguard eyes: http://www.highonbikes.com/product.asp?cookiecheck=yes&p_id=309
Make me an offer.. I can only refuse :)

I cant see that website properly hippy for some reason - can you find another pic of em?[/quote]

Does this work?

What I've got:

A Campagnolo Centaur rear brake (brand-spanking new, never been used.)
A pair of Tektro TL 720 bar end brake levers (internal cable routing, shiny silver levers, brand new, in box.)
One Tektro RX 4.1 bar end brake lever (shiny silver lever, brand new, in box.)
A pair of Ambrosio drop handlebars (about 39cm wide, 26mm diameter, scratches all over and bad scoring where a brake has been attached to the right-hand drop. Of course, you won't see that under bar tape.)
One British-made 90mm quill stem with 26mm clamp (silver in colour, with a bit of scratching. Could do with a cover plate or something, to hide the adjusting nut.) For 1" steerer tubes.
One black leather 3TTT saddle (old, worn and not well cared for by the previous owner. It's still good enough to go on someone's old bike, though)
One 16-tooth cog for a 1/8" chain. Black in colour. Lots of life left in it. Only replaced so I could run everything at 3/32".

What I'd like:

A white saddle in new or excellent used condition. Not fussy about the brand, but I'd like something that's not too wide, waterproof and free from plastic bits.
A pair of nondescript metal dust caps.
Bar end plugs. Something to match white tape, please.
Em...dunno what else. 144 BCD chainrings for five-arm cranks, maybe.

Naturally, I'd be happy to part with readies, cos my newest surplus bits and bobs aren't likely to be much use to you folk. But I'd like to think someone could find a home for the bars, stem and saddle. Beaters need parts too. :-)

Photos on request.

EDIT: SOLD FOR £10! i cannae believe it. good old gumtree!

*ive got a set of wheels from an old 10speed:

the nitty gritty details:
wheel size - 270x10&1/4 (32x630)
chrome rims (a little rusty)
rear - halford sports tyre
front - kenda tyre

what would i get in swap for these beauties!? im serious. theyre pretty bad, but maybe your dad needs some new wheels for his old 10 speed, and i need a custard slice and a donut*

No way I'd trade a custard slice and doughnut for them, sorry. :)

what will you trade for a sugar daddy then hippy?

heh. perhaps a packet of gum then?

Used gum?

NOS gum from 20 years ago?

I have a set of stock bianchi pista wheels with an 18t cog, fairly grimey and with lfgss spoke cards in the rear. Will sell/exchange them minus the spoke cards and dirt (i paid good money for that dirt). Only really been used regularly for about 2 weeks in london, so basically in mint condition with an even newer cog (3/32).

Also i have a pink dirt harry lever if anyone is interested.

I need: cranks seatpost stem headset bottom bracket deep vs (just the rims and in suitably ridiculous and preferably mismatched colours) hubs (fairly narrow rear, at least 5 or more mm narrower than stock bianchi) handlebars (risers or bullhorns) long reach front brake seat chain chainring pedals/clips/straps and a rear cog. Oh and a re-spray and possibly new dropouts. and sort of narrowy axles.

Will trade for above or money. will pay for above with trade or money

:)

oh, go on then. some used gum will do it ;)

asm
I need: cranks seatpost stem headset bottom bracket deep vs (just the rims and in suitably ridiculous and preferably mismatched colours) hubs (fairly narrow rear, at least 5 or more mm narrower than stock bianchi) handlebars (risers or bullhorns) long reach front brake seat chain chainring pedals/clips/straps and a rear cog. Oh and a re-spray and possibly new dropouts. and sort of narrowy axles.

so you want a bike minus frame and fork!

[edited] changed my mind.

dexterflexter

Anyone have the Nitto RB-021 drop bullhorn bars?

I have it to swap or sell. I also have a brand new rear cxp-22 and a selle italia seat. I need some new pedals and a fork.

astrozzack hi there,
anyone selling an iro mark v frame? size 53 pls :D
those are not that easy to source in the uk :S

you can order it from their website iro cycles

unxetas [quote]asm
I need: cranks seatpost stem headset bottom bracket deep vs (just the rims and in suitably ridiculous and preferably mismatched colours) hubs (fairly narrow rear, at least 5 or more mm narrower than stock bianchi) handlebars (risers or bullhorns) long reach front brake seat chain chainring pedals/clips/straps and a rear cog. Oh and a re-spray and possibly new dropouts. and sort of narrowy axles.

so you want a bike minus frame and fork![/quote]

...yeah. :)

Well i have a brake lever! and i actually found the headset but it'll need re-greasing and is pretty old probably rubbish/missing bearings.

I got a aerospoke rear white (painted straight from the factory) for sale. Pics on request. taking offers,done less the 50 miles on it.

50p?

Seriously though, does it have the standard hub?

thats a full pence per mile- i'd take it.

asm 50p?

Seriously though, does it have the standard hub?

Track hub

htay thats a full pence per mile- i'd take it.

If only you had an aerospoke for sale then!

asm, how much do u want for the wheels? and how much is the rear areospoke?

anybody interest in the aerospoke whisper me your email or contact me on info@cliquenmove.com

I also selling my Mercian Super Vigorelli

Thanks

i need a 17t sprocket for my bruv. the kind you use with the DMR singlespeed kit. anyone help? have various bits and pieces i will happily part with in exchange

i have some 18t ones. any good?

mr smith. i might be keen for one. how much?