You are reading a single comment by @Butters and its replies. Click here to read the full conversation.
  • No worries Joe!

    I have also struggled with Genesis attys. In case it helps anyone, I'm running my RSST with 2mm SS rope, 2mm Ekowool sleeve over the rope and 3 wraps of 0.8 x 0.1 ribbon wire at 0.6 ohm. I don't get any hotspots and there are no wicking issues, but the taste is a bit muted. It definitely needs the big power for this setup, which isn't really achievable with Vamos or 18350s. It might not matter so much with stronger flavour juices like the Trip Hammer tobaccos. I'm normally on Mrs Lords Custard Creams, which is quite a delicate flavour.

    During phone calls today, I've been making a solid SS mesh wick so that I can try this in my Kraken:

    http://www.youtube.com/watch?v=Sp-8vSTWw2E

    I need a solid wick as the Kraken doesn't have a fill port plug and the solid wick should prevent leaking through this fill port. They don't have a plug as it allows air to enter the tank and aid wicking apparently. Fingers crossed.

About

Avatar for Butters @Butters started