how are you reattaching the cable guide? i have an alan carbonio languishing in a box after the bolt holding one broke off
if the cable guide on yours are the same, they should have a tiny screw attaching it to the top tube, and a little bonding agent holding it in place, a tweek or wiggle should free it
I will tape around the offending area on the colnago , then cut round with a scalpel, then try to remove, where the guide was painted with the frame, I'm worried that if I pull it orf, it could take some of the tt paint with it, hence scalpel procedure
still had no more real feed back, apart from that it maybe Mapei GB colours
if the cable guide on yours are the same, they should have a tiny screw attaching it to the top tube, and a little bonding agent holding it in place, a tweek or wiggle should free it
I will tape around the offending area on the colnago , then cut round with a scalpel, then try to remove, where the guide was painted with the frame, I'm worried that if I pull it orf, it could take some of the tt paint with it, hence scalpel procedure
still had no more real feed back, apart from that it maybe Mapei GB colours