Transmission database - for all your crank / bb / bottom bracket questions

if you meant me, I have some miche primatos i will be installing, but i like the look of Omniums but they require a different BB. Would this fit the Langsters frame?

for the miches, this http://www.wiggle.co.uk/miche-primato-track-bottom-bracket/ or this http://www.totalcycling.com/a-z/bottom_brackets/bottom_brackets_track/BB_KINEX.html?gclid=CPqRmL_e5roCFU7KtAodgUgAAw works fine, your langseter shell will be BSA thread, 68mm wide, you just have to make sure your bottom bracket is like that too

If me, the same DA 7600 cranks

da 7600's are designed to work with a 109mm iso bb, the 111mm iso ones are as close as you can get, i have one here for sale http://www.lfgss.com/thread116579.html it'll put the chainline off by 1mm but that little doesn't really affect anything, have a look at the "database" and you'll see most people use 111mm iso axle bb's

as for using a jis bottom bracket on iso cranks, it is possible but there's no real point if there's better options about...