Any question answered...

Does anyone do a bright pink cycling jacket that isn't Rapha? They've either sold out or don't do them anymore

<3

Aldi

The pink wind jacket comes up on Ebay frequently.

is netflix UK still shit?

I like it. Have LoveFilm too, and find that between them I can usually find something decent. But they still don't do lots of older films, which is usually what I'm after.

Almost finished watching the entire Breaking Bad on netflix, I would say worth it for that alone.

Plenty of other decent series and some good films on there too.

Noobroom rocks for films. Need subscription account for series though. If anybody needs an invite let me know in PM.

Netflix > papercut to the bell end > Lovefilm

Noobroom rocks for films. Need subscription account for series though. If anybody needs an invite let me know in PM.

Is that an illegal file-sharing service?

Does anyone have Hollywood's phone number...?

06-piratebay

I have a few hours before my eurostar leaves paris - can anyone recommend a good bike stop to browse?

condor

would be good if Condor had a branch on place vendome

Go and browse the nearest bar

Ooh, lovely. I have a Park one - the one with the little plastic wheely thing at the bottom which I still don't know the purpose of.

It is for installing the arm cap on shimano cranks, they don't require a great deal of force.

http://fcdn.mtbr.com/attachments/drivetrain-shifters-derailleurs-cranks/797866d1368188384-torx-bit-size-slx-crank-cranknut.jpg

I'm not sure if I did the arm-cap up too tightly, or left it there too long, but the plastic spinner on the Park tool is useless for removing it, The allen key holding the spinner undoes, rather than the arm-cap.

Your supposed to tighten and losen using the outer disc. The allen bolt doesnt com into it.

I pipe wrench clamping the outer disc will help if its seized.

HA sorry, I misread and thought you put "leaves for paris"

Can't remember whether I used the outer disc to do it up or not . :-/

It's like that because you're only supposed to finger tighten it, it needs very little torque. It just preloads the BB bearings (a lot like a headset top cap) before you then tighten the crank arm onto the axle.

It just preloads the BB bearings (a lot like a headset top cap).

But with much less preload required, it's not so much putting in preload as taking out end float

I should buy a torque wrench that covers the range below the minimum of the only torque wrench I currently own.

does tester do rims? best budget rims to take a 700 x 28-32?

how limited are my crankset options with a push (press?) fit bearing BB setup and are they gash?

does tester do rims? best budget rims to take a 700 x 28-32?

Rigida Grizzly or Mavic A119

oooo £15.99. Now thats a price I can afford.

how limited are my crankset options with a push (press?) fit bearing bb setup and are they gash?

pf30/bb30?