You are reading a single comment by @noBlakes and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@noBlakes
mavic rims erd has been discussed a bit earlier in this thread, i remember arup saying for the open pro's and open sports it varies between 605mm and 610mm due to their nipple seat diameter. On the edd one (imo the best in terms of ease of use and) it adds 3mm to the nipple seat diameter to get the erd - 605mm.
So the next thing is your hubs, you need to measure the flange height and flange distance from centre on the hubs. edd doesn't list them (i think) because they're not used so often. This is best done with vernier callipers if you have them though. if you tell me those measurements ( http://leonard.io/edd/howtomeasure ) and the number of spokes, and lacing patterns, i'll give a second opinion :)