Bike Mielec

I'm going to run 1x9 and only the outer ring, and according to my drawings, a 32t ring should clear the cs, although not by much.

At one point I asked Robert to dent the cs where the chainring is close, but it might have gotten lost in translation.

Edit- You got me worried so I emailed Robert about adding a dent there (I don't know if it's still possible, though). If he can't do it and the 32t won't fit, I'll have to get a 30t ring.

If you look at my image (from my custom build). Looking at the frame, and imagining the cranks + BB arent fitted, makes it look impossible to have the chainring clear. Yet the drawing shows it will, even in the middle position (which is what pictured). So I'm not saying it wont. I had to lengthen my chainstays though. As you can see from the pic included in this post. I'm trying to fit in a 4.8" Lou though. Plus the chainstays are pretty fecking fat on mine.

Currently have a RaceFace crankset, which has a chunky spider. I think maybe a Middleburn would give me a few more mm's.

Anyway. Hope it all fits together. Looks like it'll build into a cool fatbike.

1 Attachment