Bike Mielec

A fat headset would disguise the forks.. (unless it's internal and already fitted...)

^i think he meant the seattube:)

That ^

It will have been reamed by Mielec, but not far enough for you. It might be cheaper/less hassle than swapping the post.

Yep, that makes sense! I'll ask about that, if it's going to be loads it's probably easier to take a saw to the post. The headset is internal, not installed yet though, I'll see how it looks but I don't know how much difference it'll make.

Without a tan^-1 function, I think that's about 5 degrees of deviation which sounds like a lot.

4.764 deg. So yeah... too high for an SS chain.

Without a tan^-1 function, I think that's about 5 degrees of deviation which sounds like a lot.

but 107mm-103mm=4mm it's 2mm on each side isn't it? so 3.17983012 degrees

1.5mm -> 2.38594403 degrees

please correct me if I'm wrong

EDIT: yeah I'm wrong
arctan(3 / 360) = 0.477453777 degrees
arctan(2 / 360) = 0.318306611 degrees
arctan(1.5 / 360) = 0.238731033 degrees

Bugfuckery. I used arctan(30/360). So it comes out to about 0.5deg with an offset of 3mm.

just ride the bike? Listen to music if your chainline is noisey. sorted

how much? :)

tub or clincher?

How much? Could be keen!

Also potentially keen pending price.

price on tri? My mielec needs one.

Trispoke is nowwwwwww up for sale. Big ups the slave Mielec crew

http://www.lfgss.com/thread99955.html#post3359792

Hi, i thought i would stop pestering snottyotter and pose a few questions before i go ahead and and buy one of these fine frames. id like to thank you in advance for any advise you can give.

1. how much did/would it cost for a triple triangle, oval tubed, low-bro with sparkly paint inc p&p
   
2. Im 6ft 2 but love smaller frames so would a large be fine?
   
3. are there any recommendations any of you could give in terms of options like the internal headset or certain tubing, smooth welds, stuff like that.
   4.how do i go about ordering myself one of these and how do i specify what exactly i want, is there an order form or should i just email the company?
   I do apologise if any of these questions have been asked before but iv pretty much read through the whole thread but might have missed a couple things. thanks once again for any help you may be able to give.
   

Hi, i thought i would stop pestering snottyotter and pose a few questions before i go ahead and and buy one of these fine frames. id like to thank you in advance for any advise you can give.

1. how much did/would it cost for a triple triangle, oval tubed, low-bro with sparkly paint inc p&p
   
2. Im 6ft 2 but love smaller frames so would a large be fine?
   
3. are there any recommendations any of you could give in terms of options like the internal headset or certain tubing, smooth welds, stuff like that.
   4.how do i go about ordering myself one of these and how do i specify what exactly i want, is there an order form or should i just email the company?
   I do apologise if any of these questions have been asked before but iv pretty much read through the whole thread but might have missed a couple things. thanks once again for any help you may be able to give.
   
   

Why don't you just contact Mielec!?

i was under the assumption that the guys over there don't speak that great English and i cant get a translation for a while, also thought you guys would be a good place to start

You'll be able to sort out most of what you want, but if you're not 100% on something before you order then maybe get a Polish speaker to confirm things.

fair enough, ill drop them an email now, but was still wondering about any personal recommendations you might be able to give, like things you would have go in hindsight after receiving your frame? thanks

I'm Polish native speaker so I can help you

And for wondering what the pattern on my shirt was on the video...
http://www.lfgss.com/post3358819-2130.html

Here it is:

i was under the assumption that the guys over there don't speak that great English and i cant get a translation for a while, also thought you guys would be a good place to start

After seeing this thread back in Oct/Nov I was a bit late in joining the group order, so I contacted Bike Mielec directly. Their english has been absolutely fine throughout the build. Go for it.

oh that's good know, I'm just waiting for them to get back to me, thanks for the advise

I really love how this turned from a budget build idea into people sourcing high grade parts for them :)

£1500 of parts on a £120 frame is exactly how I would have done it. I'm also loving the personalised BB stamps. I am going to treat myself to one of these for the summer.

OT question/request!

Looking through this thread I've seen that BONOR, Titan Uranus, roboto & V-L have the graphic design/photoshop skills to make custom decals. Some have the means to print them out too.

I was wondering if anyone would be interested into making me some decals based on the cinelli font found on the histogram. I'd like to cover up the decals on the chainstays & possibly the downtube.

I'd like it to say 'remalli' (in greeklish) or possibly 'ρεμαλι' (in greek), with the first letter 'r' or 'ρ' having the cinelli wings on it. Same color (in blue, except for the first letter which would be white with a blue outline) & font of course.

If anyone puts in the time to do this I would obviously compensate them for their effort.

OT question/request!

Looking through this thread I've seen that BONOR, Titan Uranus, roboto & V-L have the graphic design/photoshop skills to make custom decals. Some have the means to print them out too.

I was wondering if anyone would be interested into making me some decals based on the cinelli font found on the histogram. I'd like to cover up the decals on the chainstays & possibly the downtube.

I'd like it to say 'remalli' (in greeklish) or possibly 'ρεμαλι' (in greek), with the first letter 'r' or 'ρ' having the cinelli wings on it. Same color (in blue, except for the first letter which would be white with a blue outline) & font of course.

If anyone puts in the time to do this I would obviously compensate them for their effort.

Try this: http://www.lfgss.com/thread96643.html

I sent V-L a PM yesterday night. Just thought this thread has more people following it. Worth a shot.

wacked up a quick jobby

That's hilarious BONOR! Nice work for a 'quick jobby'.
You interested in tweaking this to perfection?
If so PM me to discuss what you would like in exchange.
Ideally it should begin with a small 'r'.

I think Bonor works for spokks only

I'd like it to say 'remalli' (in greeklish) or possibly 'ρεμαλι' (in greek)

I want one that says 'αλάνι'