Thanks for answer but i'll now ask an even noobier question....How does one 'clear coat' oneself....especially as i don't want to spoil the job done by Armourtex?
There is a 2Pac spray product available on Ebay called NuAgain.
It is quite pricey but very good and tough. It is a chemical process to cure and takes a bit of time to fully harden but it is good and strong.
It coluds slightly with any moisture but this goes away when cured. If applied in coats built up gradually, the aromourtex finish will shine through!!
There is a 2Pac spray product available on Ebay called NuAgain.
It is quite pricey but very good and tough. It is a chemical process to cure and takes a bit of time to fully harden but it is good and strong.
It coluds slightly with any moisture but this goes away when cured. If applied in coats built up gradually, the aromourtex finish will shine through!!