Wheelbuilding / Wheel Building / Wheel build help

tension sounds very low, I'd have it at at least 24 on the drive side. think my rear double fixed open pro wheel is 25 on both sides. thats with dt champ, I go pretty high because of my weight, the rim can take it, no signs of cracks at the eyelets. when its too high you'll know

I think 23 is about 125-130 kgF on 1.8 spokes, right? You can certainly do that on an Open Pro. They're strong. That's what I normally go to on a good rim on a non-dished wheel so 24 DS and whatever the NDS comes out as (18ish?) should be ok. The rim will pull out of true when you stress relieve it if you've gone too high.