Will from HubJub is God!

The second list of spares for you to have first dibs on:

HUBJUB SPARES LIST

Hi guys, this is the second listing of stuff for sale. As promised I've gone right through Hubjub's legendary spares pile. The result is an odd mix of brand-new high-end and some real bottom-of-the-box turkeys, so it's worth trawling the whole lot Just In Case. Remember, what's trash to you may be treasure to someone else.

Practical notes:--

i. Condition is new, possibly with light shelfwear, unless otherwise mentioned. If an item is used, it is graded as light use / medium use / heavy use / shed find. Take careful note!

ii. Items marked * will go on eBay on Thursday night. Get in quick if you want them. Items marked ** may go on eBay in ten days' time.

Best, W.

---

Bags and clothes--
Swiss Army hat, brilliant winter wear, size 'M' only 7.00
Hi-Gear 'Cargo'-series framebag, top tube and head tube mounts, heavy use 4.50 + 2.50

BBs and spares--
Phil Wood mounting cups, Brit, stainless BNIB 15.00 + 2.00*
Crank bolts, allen fitting 4.50 + 1.50

Cranks, rings and spares--
Sugino Zen ring, 46t, light use 28.00 + 3.00**
Sugino Mighty Comp ring, 144 BCD 43t, medium use 7.50 + 2.00
Stronglight single chainring bolts, light use 3.50 + 1.50
Sugino single chainring bolts, BNIB, black alloy, allen key fitting 12.00 + 1.50*
Soma Pake LH crank, 165mm silver, used 8.50 + 2.50

Hubs, wheels and spares--
Phil Wood keirin axle set; this comprises a steel axle and NJS-type steel spacers with serrated faces and will convert your 120mm High-Flange or Low-Flange into a 110mm keirin hub with a specially toughened axle 35.00 + 2.00*
Phil Wood front axle (for High and Low Flange hubs); threaded for bolts, bolts not incl. 17.00 + 2.00*
Phil Wood PW001 bearings, set of two 10.00 + 2.00*
Phil Wood mounting washers for bolt-on hubs pair 5.00 + 1.00
Dura-Ace 7600 rear hub seal rings, set of four 3.50
Dura-Ace 7600 front hub seal rings, set of four 3.50
LeVeL respacer kits, 120 and 135, old and new styles 8.00
LeVeL rear axle 25.00 + 2.50
LeVeL TorX bolts, loads, set of 3 1.00 + 1.00
LeVeL mounting washers, pair 3.00
M8 bolts 2.00 + 1.00
White Industries 'shorty' M8 bolt 2.50 + 1.00
White Industries mounting washers, pair 4.00 + 1.00
Sturmey 'SW' hub, 40h, rare hub, shed find 12.00 + 4.00**
Sturmey 'FW' hub, 40h, shed find 12.00 + 4.00**
Sturmey 4-speed trigger, shed find 4.00 + 1.50**
Wheelsmith spokes, DB14-blank 280-310 DP, bag of 50 19.00 + 2.50
Sachs 3dog cogs; these are compatible with Sturmey S2c, 3- and 5-spd but much nicer than current Sturmey; steel with galvanized or zinc coating; no dish, hence good for mixed Sturmey/fixed txs; loads 3.00 + 1.00

Saddles--
Brooks B-17, brown, shed find 5.00*
Wrights W3SW 'swallow'-type saddle; bad tear in leather; good choice for renovation as the design doesn't require a laidback post, unlike the Brooks 5.00 + 2.50*
Ridgeback comfort saddle, absolutely hideous 5.00 + 3.00

Seatposts and spares--
Ritchey post, 27.0 column (fits 531c/Tange), black, heavy use 5.00 + 3.50
Nitto S-83 seatpost clamp bolt and cyclinder nut 4.50 + 1.50

Stems and spares--
Nitto UI-5gx stem, 110mm, bad blemish 12.00 + 2.00
Nitto Technomic Deluxe expander bolt and nut 4.50 + 2.00
Nitto Pearl/T. Dlx triangle nut and bolt from stem clamp 4.50 + 1.50
Nitto UI-5gx faceplate bolts, set of four 3.50 + 1.00
Nitto UI-5gx steerer clamp bolts, set of two 2.50 + 1.00

Tools--
Cyclo 24mm spanner / lockring spanner 4.00 + 3.00

Pedals and spares--
Shimano SM-PD64 cleats, grey nylon, BNIB with all fittings 30.00 + 2.00*
Plastic 'strapless/half-cup' toeclips, black 2.00 + 1.50

Other--
Syntace 1->1 1/8 shim for threadless setups 4.50 + 1.50
Weinmann non-aero lever, good for RH brake on a fix, gum hood, heavy use 3.50 + 1.50