You are reading a single comment by @O'Shane and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@O'Shane
I think he means that the axle diameter is 9mm instead of 10mm (old hubs). iirc modern road hub front axles are 9mm and rear is 10mm. Those Halo hubs don't use standard axles so a replacement isn't an option.
Personally, I'd mark the dropout with some masking tape and file it to 10mm, it then means that you can put any wheel in the rear. Also those hubs are 120mm width so it looks like your dropouts are set to the correct width already