• I quite like the idea of doing this but can you explain how it's done?

    My solution to rattling SRAM lever:
    https://www.lfgss.com/post2355674-49714.html

    In the long term, I'd like to do something more elegant by putting a length of wire between the lever (in the normal cable barrel) and the lever body cable stop, but it's going to need some custom parts to allow tensioning. A short length of spoke threaded at both ends and a couple of nipples nearly works, so imagine something like that but with thinner wire and cylindrical nipples with just a screwdriver slot rather than square flats.

    Shimano SLR levers (anything post about 1985) have return springs in the lever, so if they are in place and working the levers shouldn't rattle except over really severe bumps which are rattling everything else too.

About

Avatar for gbj_tester @gbj_tester started