• Beater frame (PRICE DROP - £7), MASSIVE SPEAKERS handle bars, shifters, front mesh, bikes...

    Hi all,
    I have some stuff in my shed that I don't and will not use, so it's for sale.
    I'm London based, and don't want to post (sorry, too lazy), so collection / delivery / meeting at drinks, can be arranged.
    At the end of this, if I sell anything or all, I will give 10% of it to the forum.
    Dibbs and PM as usual, sorry if I am slow answering during WE...

    1/ 3TTT pista handle bars, £25: [sold]

    2/Beater frame, £10 ---- PRICE DROP £7 SOLD PENDING PICK-UP because I had to use the seat post on another bike-----:
    It's an old Dawes mountain bike frame (reynolds 500 cro-mo, lugged) that I found and converted to a fixed gear beater (using 700c). I do not use it anymore...
    It comes with a headset that needs replacement because is has a tight spot (you can not cycle with no hands because of that) unless, like I did, you consider that it doesn't matter as it is only a beater.
    BB could do with a servicing as well, but once again, for a beater, it was fine to my standards.
    It also comes with a mis-matching crankset: Shimano Exage on the drive side, that you can not remove unless you attack it with an angle grinder because the thread is f**ked and no crank remover can get it out, and a basic Stronglight left arm.
    Finaly, it has vertical drop out, so you would need to use magic gear... I used 42X16 with a half link and chain tension was perfect.
    The bottom picture shows how it looks like once built... All braze-on bits (cable stops, cantilever support on seat stays, etc...) on the frame (not the fork though) have been carefully and nicely shaved / removed and properly filed / sanded, then clear lacquered so it does not rust...
    Size: Center of BB to top of seat post tube = 55cm (but as you can see the top tube is lower so I suppose you can take off 2cm from that...
    Center of seat tube to center of head tube (top tube lenght I mean) = 56cm
    http://img406.imageshack.us/img406/4628/dawesbeaterfr.jpg

    3/ Italia XO saddle £8 :
    Good condition. No cuts. Tiny marks.
    http://img339.imageshack.us/img339/1465/italiaxosaddle.jpg

    4/ Vetta Saddle £4 or a beer if we meet at drinks:
    Old, with scratches, some deeper at the back...
    http://img231.imageshack.us/img231/3366/vettasaddle.jpg

    5/ Other bars... Raw aluminium are £3***, black and steel ones are £5: [see below what is still available] ***

    6/ 3TTT stem and Cinelli Giro Del Italia combo £10 [sold]:
    7/ 3ttt Stem £15 [sold]:
    8/ Shimano parts, brakes, downtube shifters £10 each, front mech £5 : [see below what is still available]

    9/ Short aluminium mudgards (£free) and Brompton seat post (£5); [all 3 short mudgard pair available again - see post 44 - collection at South and South East Drinks ONLY]

    • 3 pair of short mudgards available.
    • I believe there is 3 types of seat post with Brompton, the standard, the longer one, and the telescopic one. I am 80/100 sure this one is the longer one, was not long enough for me so I had to get the telescopic one. Ask me for dimension if interested...
      http://img707.imageshack.us/img707/408/miscmudbrompton.jpg


    10/ Friends are selling their bikes... I am helping them:

    • Well ugly Carrera mountain bike, needs a good clean, but I believe he did not put many miles on it... He wants £100 o.n.o. for it... I know this is not the right place for it, but I said I would help...
      http://img337.imageshack.us/img337/3400/mtgecarrera.jpg
    • Another friend is leaving London, she wants to sell her bike, touring like, blue raleigh from early 80s I think, mixte frame, decent condition, budget parts, she wants £50 for it... She said she would take picture this week end, I will remind her if there is any interest...


    Voila voila!!

    Loic

  • dibs on number 6 please. pm sent

  • dibs short mudguards

  • I'll take the brakes if they're £10 for both?

  • I'll take the brakes if they're £10 for both?

    Yes it's the pair.

    Loic

  • 2nd dibs on brakes.

  • Are the shifters indexed? I need 7 or 9.

    Cheers.

  • Yes it's the pair.

    Loic

    I'll definitely take them then - will PM you.

  • Are the shifters indexed? I need 7 or 9.
    Cheers.

    Not sure... I doubt they would take 9 though... There are 2 positions for the rear mesh shifter, you can choose indexed or friction.

    Will check for you.

    Loic

  • Thanks, I'll be back on line later.

  • interested in no 6 if still available

  • Hey dude, lady friend of mine is looking for a mixte frame, how tall is your friend?

  • Hey dude, lady friend of mine is looking for a mixte frame, how tall is your friend?

    Hi Chris,

    Just called her, she is 1.66m, and she says the bike fits her perfectly.

    Let me know!

    Loic

  • Hi, Dibs please - black Alu 7075 TSHT double butted road bars.

  • Dibs on mudgards, what is the seatpost diameter? PM sent.

  • Dibs on no 3, the italia XO saddle as well please

  • I'd like to see a picture of the Raleigh please!

  • Dibs on the 3ttt stem, what's the clamp size?

  • Dibs or maybe second dibs 7.) 3 ttt stem

    dibs 1 pair short mudguards

  • front mesh lol

  • Any news on the sifters?

  • Dibs the half taped bars (as long a they are 26mm clamp) and a set of mudgards, PM on its way

  • second dibs on mudguards!

  • Dibs on mudgards, what is the seatpost diameter? PM sent.

    Brompton seat post diameter is 31.8.

    Loic

  • I'd like to see a picture of the Raleigh please!

    Sorry for this, I've asked my friend twice, but she has not come back to me yet...
    Just sent her a message again...

    Loic

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

For Sale: Track drops, beater frame, handle bars, brakes, shifters, front mesh, bikes...

Posted by Avatar for veLLo @veLLo

Actions