Belt drive fixed

I don't have that much space in my drops to tension a difference of 1t and I would like to keep the Rohloff direct drive gear (#11) to the same as my single-speed gear (approx 74.5 gear inches).
All make sense?

Does now ;)

I was under the impression the Rohloff sprocket (via a threaded carrier ring) came in 19, 20, 22, and 24 teeth versions. If you look at the Gates/Rohloff instructions below (page 23) they are listed.

http://www.g-boxx.com/pdf/Gates-Rohloff-manual-en.pdf