Belt drive fixed

So who's got a belt then? Huh?

I think I'm going to go for it now.

I've worked out I need a 55t beltring and a 20t sprocket. The sprocket will have to be the Phil Wood one because the Gates one for Rohloff is only 19t and I want to keep the same belt and be able to run single-speed on it.

I also think I need the 118 length belt.

But more importantly... where do you order the bits from? I seem to only be able to find listings of those that build bikes pre-fitted rather than details for a supplier who will sell the individual components and let you retro-fit your own (well, the frame was built for it, but I started with chain because of the lack of a 20t Rohloff sprocket).

Have you used this? http://www.carbondrivesystems.com/images/uploads/forbikemaker_1253100220.xls
I cant see why you'd need to go for the Phil TBH.

This is the european distributor for gates. I havent had any contact with them yet. I was thinking of ordering a 24t alfine sprocket at some point.
http://www.g-boxx.com/e-carbondrive.html

I found it very easy to set-up. The belt is lateraly very stiff, so dialing in the chainline is just a case letting the belt show where it wants to be.