You are reading a single comment by @TheBrick(Tommy) and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@TheBrick(Tommy)
The run to your main sack pipe should not be too long.
See if you can work out if after the u bend there are any more beds until the soil pipe. If not just try and push it all through into the stackl pipe.
If there is lotss of beds have a look and see if they have a compression style fitting (this has a big srew type thing around each joint) or glue fitted
Compression
Glue
If it is compression you can try taking it a part a bit at a time and tring to seethe blockage. If you live in a building where your main stack pipe runs outside the house you will clearly you will not beable to get all of the pipes of too inspect but still may beable to have a look at alot.
If they are glued joints you will have to cut through them and find out where it is clear and replace from there to your u bend. Really it's the job of your land lord if it gets that awkward as you will have to buy parts.