You are reading a single comment by @stevo_com and its replies. Click here to read the full conversation.
  • Foot rests are from Ali express, they just thread on to the exposed axle (after the nut locks wheel in place). Sturmey archer is some silly size like 3/8. Readily available though.

    Fork was a burly 1 1/8 disc fork I had knocking about. I have another similar tonk boi here somewhere that would do the job I think. Could sell for cheap if it is suitable and you would like to do the same.

    Seat is a piece of wood, topped with a dense foam then upholstered with outdoor seating textile. Anything would do really.

    It’s mounted to the rack with pipe clips that I screwed into the wooden base. I used four and it works great. Nothing to stop you adding more though.

    Brakes are drum brake rear, 180mm disc rotor and shimano deore 2 pot on front

    It’s v solid and nice to ride. Have done some pretty big trips with partner on the back. I’ve even had my brother as pillion, he’s about 90kg 😀

    For a child I would be v tempted to put in some sort of separator between their feet and the spokes.

  • For a child I would be v tempted to put in some sort of separator between their feet and the spokes.

    This. Some gruesome stories from before Tern started putting wheel/spoke guards on the GSD as standard.

About

Avatar for stevo_com @stevo_com started