You are reading a single comment by @Rik_Van_Looy and its replies. Click here to read the full conversation.
  • From looking at some videos of the Wilfa Svart it looks like the burr arrangement is the same as a Dualit grinder that I have. The burrs have got quite blunt after many years of use, but the top burr can also develop play in its holder, which would make it rattle. I shimmed mine with some very thin brass (coke can would work) to try to remedy that. Can't promise that it will work but possibly worth a try.

  • Interesting - will take a look at this
    Timer on my Svart is a little flaky but I know my dose is ground when the burr sound moves from grinding to a high pitched scream! I’ve been meaning to investigate for a while and will look at shimming

About