You are reading a single comment by @MCamb and its replies.
Click here to read the full conversation.
-
I’m thinking the OEM axle plate that Merlin is supplying might be ok for use with cube. So no new axle plate needed. See urban arrow rear dropout arrangement with Rohloff:
solid axle, OEM axle plate , post mount disc brakes, long vertical dropout. No torque arms, speed bones etc needed.
The dropout needs to be long and stout enough though on cube for this to be the case. With wheel fully sat in, that support block on OEM axle plate replaces the need for any additional torque bracing.
Cube specs need to be double checked against Rohloff manual (which is quite comprehensive) to be sure.
MCamb
amey
thank you both! really appreciated :)
I dug this out.
Which has detailed drawing of the dropouts. It also looks like they ship the same dropouts for enviolo and the deore build.
@MCamb so you are saying if I get the Merlin deal I'd need a diff axle plate right?
Cable management could be tricky yes but I think I can live with that, cables run on the steerer tube and exit at the bottom I think.