You are reading a single comment by @stelfox and its replies.
Click here to read the full conversation.
-
that does sound unfamiliar.
I would take off and gently sand the axle / bearings with thin sandpaper. could be a small irregularity or oxydation from previous use.last time this happened to me it was with sugino cranks on regular shimano bb, i had to resort to more than mallet action to take them out after a couple of months use.
-
Yeah they should be very snug
Glws
b0n0rv2
@stelfox
Has anyone else fitted the wheels mfg 24mm axle shim, and found a Shimano axle quite a tight fit? I needed some force with a rubber mallet to get it through