You are reading a single comment by @konastab01 and its replies. Click here to read the full conversation.
  • Hung a radiator. Used about 5 wraps of PTFE tape on the tail threads. One leaked. Took it off and used about 7 wraps, still leaks. New rad, new tails and valves. What do? Worried about taking it on and off too much and damaging the compression fitting on the TRV.

  • If I’m using PTFE I’d go at least 10 to 12.

    I also use loctite thread sealer which is decent!

    Some rads, towel rads don’t seem to have a end stop and you can screw it in too far

About

Avatar for konastab01 @konastab01 started